A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model
|Updated:2026-02-12
|
A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model
A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model
中国化学工程学报(英文版)2025年88卷第12期 页码:188-197
Affiliations:
1. Shanghai Key Laboratory of Materials Protection and Advanced Materials in Electric Power, Shanghai University of Electric Power,Shanghai,China,200090
2. State Key Laboratory of Chemical Engineering, East China University of Science and Technology,Shanghai,China,200237
3. College of Smart Energy, Shanghai Jiao Tong University,Shanghai,China,200240
4. School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University,Shanghai,China,200240
Gaoyang Li, Xiaoyu Guo, Yongshuai Li, 等. A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model[J]. 中国化学工程学报(英文版), 2025,88(12):188-197.
Gaoyang Li, Xiaoyu Guo, Yongshuai Li, Jialong Huang, Zhirui Wang, Yizheng Ma, Litao Zhu, Hui Pan, Feng Shao, Hao Ling, Yulin Min. A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model[J]. Chinese Journal of Chemical Engineering, 2025, 88(12): 188-197.
Gaoyang Li, Xiaoyu Guo, Yongshuai Li, 等. A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model[J]. 中国化学工程学报(英文版), 2025,88(12):188-197.DOI: 10.1016/j.cjche.2025.05.045.
Gaoyang Li, Xiaoyu Guo, Yongshuai Li, Jialong Huang, Zhirui Wang, Yizheng Ma, Litao Zhu, Hui Pan, Feng Shao, Hao Ling, Yulin Min. A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model[J]. Chinese Journal of Chemical Engineering, 2025, 88(12): 188-197.DOI: 10.1016/j.cjche.2025.05.045.
A data-driven identification method for reaction rate constant and diffusion coefficient in the P2D model
accurately obtaining key internal state parameters is essential. However
traditional parameter measurement methods either require opening the battery or long-term measurements
which are impractical. Therefore
the fixed values are commonly used for these parameters in electrochemical models and have significant limitations. To overcome these limitations
this paper proposes a deep neural network (DNN) based data-driven evaluation method to determine model parameters. By coupling an improved one-dimensional isothermal pseudo-two-dimensional (P2D) model with DNN
this study identified concentration-dependent parameters through detailed discharge curve analysis. The results show that the data-driven method can effectively obtain the change trend of concentration-dependent parameters through the charge and discharge curve
and the method can be extended to different battery systems in different discharge rates and aging applications. This work is expected to provide new parameter selection insights for data-driven battery prediction and monitoring models.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Testing and validation of a self-diffusion coefficient model based on molecular dynamics simulations
Bubble dispersion intensification via flow guidance and drainage in a bubble column with internals
CFD-PBM simulation of liquid-liquid dispersions in an industrial pulsed disc and doughnut column with directly measured breakup and coalescence kernels
Mechanochemical preparation and properties of B-N doped carbon materials based on calcium carbide
Dynamic behavior of a single bubble in cavity flow driven by a turbulent channel
相关作者
Xia Chen
Yan Wang
Lianying Wu
Weitao Zhang
Yangdong Hu
相关机构
College of Chemistry and Chemical Engineering, Ocean University of China
College of Chemistry and Chemical Engineering, Qingdao University