Performance, optimization, and mechanism of nitric oxide removal by thiourea dioxide/FeIIEDTA reaction systems
Energy, Resources and Environmental Technology|Updated:2026-01-06
|
Performance, optimization, and mechanism of nitric oxide removal by thiourea dioxide/FeIIEDTA reaction systems
Performance, optimization, and mechanism of nitric oxide removal by thiourea dioxide/FeIIEDTA reaction systems
中国化学工程学报(英文版)2020年28卷第11期 页码:2918-2927
Affiliations:
State Key Laboratory for Nuclear Resources and Environment, School of Chemistry, Biology and Materials Science, East China University of Technology,Nanchang,China,330013
Feiqiang He, Xinyu Zhu, Xianchun Chen, 等. Performance, optimization, and mechanism of nitric oxide removal by thiourea dioxide/FeIIEDTA reaction systems[J]. 中国化学工程学报(英文版), 2020,28(11):2918-2927.
Feiqiang He, Xinyu Zhu, Xianchun Chen, Jianhua Ding. Performance, optimization, and mechanism of nitric oxide removal by thiourea dioxide/FeIIEDTA reaction systems[J]. Chinese Journal of Chemical Engineering, 2020, 28(11): 2918-2927.
Feiqiang He, Xinyu Zhu, Xianchun Chen, 等. Performance, optimization, and mechanism of nitric oxide removal by thiourea dioxide/FeIIEDTA reaction systems[J]. 中国化学工程学报(英文版), 2020,28(11):2918-2927.DOI: 10.1016/j.cjche.2020.06.021.
Feiqiang He, Xinyu Zhu, Xianchun Chen, Jianhua Ding. Performance, optimization, and mechanism of nitric oxide removal by thiourea dioxide/FeIIEDTA reaction systems[J]. Chinese Journal of Chemical Engineering, 2020, 28(11): 2918-2927.DOI: 10.1016/j.cjche.2020.06.021.
Performance, optimization, and mechanism of nitric oxide removal by thiourea dioxide/FeIIEDTA reaction systems
a new innovative absorption system containing both thiourea dioxide (TD) and Fe
Ⅱ
EDTA was used to NO removal. The independently influences of O
2
volume concentration
TD concentration
original pH value and absorbent temperature on NO removal in bubbling device were examined preliminarily. The results revealed that the NO removal efficiency firstly increased and then decreased with the increasing of the three independent variables (O
2
volume concentration
TD concentration and temperature). However
the NO removal efficiency monotonously increased to some extent with pH value increasing from 6.5 to 10.5. In addition
the respective effects of the four variables and the interactive function of them on NO removal were checked with the response surface methodology (RSM) by central composite design (CCD). The calculative model showed that pH value possessed a main positive independent impact on NO removal. Furthermore
the interactive effects between any two factors were expounded by the 3D surface and counter plots. Finally
the optimum absorption conditions for the maximum NO removal at 94.3% experimentally and
95.8% statistically were obtained in O
2
volume content of 6.0%
TD concentration of 0.02 mol·L
-1
original pH value of 10.5 and absorption temperature of 42 ℃.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Nitric oxide removal from flue gas coupled with the FeIIEDTA regeneration by ultraviolet irradiation
Industrial TiO2 based nacreous pigments as functional building materials: Photocatalytic removal of NO
Effect of gas composition on nitric oxide removal from simulated flue gas with DBD-NPC method
Modification of PES/PU membrane by supercritical CO2 to enhance CO2/CH4 selectivity: Fabrication and correlation approach using RSM
Permeation properties of CO2 and CH4 in asymmetric polyethersulfone/polyesterurethane and polyethersulfone/polyetherurethane blend membranes
相关作者
Feiqiang He
Jianhua Ding
Yuling Zhu
Zhuyao Li
Jinbo Ouyang
Ying Dai
Ziwei Liu
Yuan Xu
相关机构
School of Chemistry and Materials Science, East China University of Technology
College of Materials and Chemical Engineering, Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials, China Three Gorges University
Engineering Technology Research Center of Henan Province for Solar Catalysis, College of Chemistry and Pharmaceutical Engineering, Nanyang Normal University
College of Physics and Electronic Engineering, Nanyang Normal University
School of Chemical Engineering, Northwest University