Optimization of FX-70 refrigerant evaporative heat transfer and fluid flow characteristics inside the corrugated tubes using multi-objective genetic algorithm

Mirollah Hosseini; Hamid Hassanzadeh Afrouzi; Sina Yarmohammadi; Hossein Arasteh; Davood Toghraie; A. Jafarian Amiri; Arash Karimipour

doi:10.1016/j.cjche.2020.05.036

Your Location：

Home >

Browse articles >

Optimization of FX-70 refrigerant evaporative heat transfer and fluid flow characteristics inside the corrugated tubes using multi-objective genetic algorithm

Chemical Engineering Thermodynamics | Updated：2026-01-06

- Optimization of FX-70 refrigerant evaporative heat transfer and fluid flow characteristics inside the corrugated tubes using multi-objective genetic algorithm
- Optimization of FX-70 refrigerant evaporative heat transfer and fluid flow characteristics inside the corrugated tubes using multi-objective genetic algorithm
- 中国化学工程学报（英文版） 2020年28卷第8期页码：2142-2151
- Affiliations：
  
  1. Department of Mechanical Engineering, Islamic Azad University, Qaemshahr Branch, Qaemshahr, Mazandaran,Iran
  2. Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol,Iran
  3. Department of Mechanical Engineering, Isfahan University of Technology, Isfahan,Iran
  4. Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr,Iran
  5. Sustainable Management of Natural Resources and Environment Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City,Vietnam
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2020.05.036
  中图分类号：
- 纸质出版：2020
- Accepted：
Scan QR Code
Mirollah Hosseini, Hamid Hassanzadeh Afrouzi, Sina Yarmohammadi, 等. Optimization of FX-70 refrigerant evaporative heat transfer and fluid flow characteristics inside the corrugated tubes using multi-objective genetic algorithm[J]. 中国化学工程学报（英文版）, 2020,28(8):2142-2151.

Mirollah Hosseini, Hamid Hassanzadeh Afrouzi, Sina Yarmohammadi, Hossein Arasteh, Davood Toghraie, A. Jafarian Amiri, Arash Karimipour. Optimization of FX-70 refrigerant evaporative heat transfer and fluid flow characteristics inside the corrugated tubes using multi-objective genetic algorithm[J]. Chinese Journal of Chemical Engineering, 2020, 28(8): 2142-2151.
Mirollah Hosseini, Hamid Hassanzadeh Afrouzi, Sina Yarmohammadi, 等. Optimization of FX-70 refrigerant evaporative heat transfer and fluid flow characteristics inside the corrugated tubes using multi-objective genetic algorithm[J]. 中国化学工程学报（英文版）, 2020,28(8):2142-2151. DOI： 10.1016/j.cjche.2020.05.036.

Mirollah Hosseini, Hamid Hassanzadeh Afrouzi, Sina Yarmohammadi, Hossein Arasteh, Davood Toghraie, A. Jafarian Amiri, Arash Karimipour. Optimization of FX-70 refrigerant evaporative heat transfer and fluid flow characteristics inside the corrugated tubes using multi-objective genetic algorithm[J]. Chinese Journal of Chemical Engineering, 2020, 28(8): 2142-2151. DOI： 10.1016/j.cjche.2020.05.036.

摘要

Abstract

In this study

the heat transfer optimization (evaporation) and the specification of the FX-70 zeotropic refrigerant flow inside a corrugated pipe have been investigated. Despite the low HTC (HTC)

this type of refrigerant is highly applicable in low or medium temperature engineering systems during the evaporation process. To eliminate this defect

high turbulence and proper mixing are required. Therefore

using heat transfer (HT) augmentation methods will be necessary and effective. In order to find the most favorable operating conditions that lead to the optimum combination of pressure drop (PD) and HTC

empirical data

neural networks

and genetic algorithms (GA) for multi-objective (MO) (NSGA II) are used. To investigate the mentioned cases

the geometric parameters of corrugated pipes

vapor quality

and mass velocity of refrigerant were studied. The results showed that with vapor quality higher than 0.8 and corrugation depth and pitch of 1.5 and 7 mm

respectively

we would achieve the desired optimum design.

关键词

Keywords

references

浏览量

190

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Multi-objective modeling and optimization for scheduling of cracking furnace systems

Nonlinearmodel predictive control based on support vectormachine and genetic algorithm

Optimization of Fermentation Media for Enhancing Nitrite-oxidizing Activity by Artificial Neural Network Coupling Genetic Algorithm*

Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis

Enhancing corrosion resistance of heat-assisted forming titanium bipolar plate for proton exchange membrane fuel cell through optimized heat treatment