Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO<sub>2</sub> absorption

Lubna Ghalib; Ahmed Abdulkareem; Brahim Si Ali; Shaukat Ali Mazari

doi:10.1016/j.cjche.2020.03.006

Your Location：

Home >

Browse articles >

Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO₂ absorption

Catalysis, Kinetics and Reaction Engineering | Updated：2026-01-06

- Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO₂ absorption
- Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO₂ absorption
- 中国化学工程学报（英文版） 2020年28卷第8期页码：2099-2110
- Affiliations：
  
  1. Materials Engineering Department, Mustansiriyah University, Baghdad,Iraq,14022
  2. Mathematics Science, Directorate General of Education Rusafa 1, Baghdad,Iraq
  3. Department of Chemical Engineering, University of Malaya,Kuala Lumpur,Malaysia,50603
  4. Department of Chemical Engineering, Dawood University of Engineering and Technology,Karachi,Pakistan,74800
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2020.03.006
  中图分类号：
- 纸质出版：2020
- Accepted：
Scan QR Code
Lubna Ghalib, Ahmed Abdulkareem, Brahim Si Ali, 等. Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO₂ absorption[J]. 中国化学工程学报（英文版）, 2020,28(8):2099-2110. DOI: 10.1016/j.cjche.2020.03.006.

absorption[J]. 中国化学工程学报, 2020, 28(8): 2099-2110.
Lubna Ghalib, Ahmed Abdulkareem, Brahim Si Ali, 等. Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO₂ absorption[J]. 中国化学工程学报（英文版）, 2020,28(8):2099-2110. DOI: 10.1016/j.cjche.2020.03.006. DOI：

absorption[J]. 中国化学工程学报, 2020, 28(8): 2099-2110. DOI： 10.1016/j.cjche.2020.03.006.

摘要

Abstract

A mechanistic model is developed to investigate the influence of an activator on the corrosion rate of carbon steel in the absorption processes of carbon dioxide (CO

). Piperazine (PZ) is used as the activator in diethanolamine (DEA) aqueous solutions. The developed model for corrosion takes into consideration the effect of fluid flow

transfer of charge and diffusion of oxidizing agents and operating parameters like temperature

activator concentration

loading and pH. The study consists of two major models: Vapor-liquid Equilibrium (VLE) model and electrochemical corrosion model. The electrolyte-NRTL equilibrium model was used for determination of concentration of chemical species in the bulk solution. The results of speciation were subsequently used for producing polarization curves and predicting the rate of corrosion occurring at the surface of metal. An increase in concentration of activator

increases the rate of corrosion of carbon steel in mixtures of activated DEA.

关键词

Keywords

references

浏览量

309

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Effect of the presence of trace sulfur dioxide on piperazine-based amine absorbents for carbon dioxide capture

Thermal degradation of diethanolamine at stripper condition for CO2 capture: Product types and reaction mechanisms

Preparation and performance analysis of non-aqueous absorbents based on alcohol ether organic compounds for CO2 capture

Hydrogen production from biomass waste gasification under the enhancement of catalyst-sorbent hybrid functional material synthesized from steel slag

The template-free synthesis of zeolite NaY for CO2 capture

Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO2 absorption

Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO2 absorption

DOI：10.1016/j.cjche.2020.03.006

摘要

Abstract

关键词

Keywords

references

Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO₂ absorption

Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO₂ absorption