Numerical study of <i>n</i>-heptane/benzene separation by thermal diffusion column

Neda Hashemipour; Javad Karimi-Sabet; Kazem Motahari; Saeed Mahruz Monfared; Younes Amini; Mohammad Ali Moosavian

doi:10.1016/j.cjche.2018.10.004

Your Location：

Home >

Browse articles >

Numerical study of n-heptane/benzene separation by thermal diffusion column

Fluid Dynamics and Transport Phenomena | Updated：2026-01-06

- Numerical study of n-heptane/benzene separation by thermal diffusion column
- Numerical study of n-heptane/benzene separation by thermal diffusion column
- 中国化学工程学报（英文版） 2019年27卷第8期页码：1745-1755
- Affiliations：
  
  1. Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak,Iran
  2. Material and Nuclear Fuel Research School(MNFRS), Nuclear Science and Technology Research Institute, Tehran,Iran
  3. Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran,Iran
  4. Department of Chemical Engineering, Isfahan University of Technology, Isfahan,Iran
  5. School of Chemical Engineering, Faculty of Engineering, University of Tehran, Tehran,Iran
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2018.10.004
  中图分类号：
- 纸质出版：2019
- Accepted：
Scan QR Code
Neda Hashemipour, Javad Karimi-Sabet, Kazem Motahari, 等. Numerical study of n-heptane/benzene separation by thermal diffusion column[J]. 中国化学工程学报（英文版）, 2019,27(8):1745-1755. DOI: 10.1016/j.cjche.2018.10.004.

-heptane/benzene separation by thermal diffusion column[J]. 中国化学工程学报, 2019, 27(8): 1745-1755.
Neda Hashemipour, Javad Karimi-Sabet, Kazem Motahari, 等. Numerical study of n-heptane/benzene separation by thermal diffusion column[J]. 中国化学工程学报（英文版）, 2019,27(8):1745-1755. DOI: 10.1016/j.cjche.2018.10.004. DOI：

-heptane/benzene separation by thermal diffusion column[J]. 中国化学工程学报, 2019, 27(8): 1745-1755. DOI： 10.1016/j.cjche.2018.10.004.

摘要

Abstract

In this article

numerical simulations are performed to investigate the performance of the thermal diffusion column for the separation of

-heptane/benzene mixture. The present work tried to optimize column by analyzing significant parameters such as feed flow rate

temperature and cut. In order to obtain the hydrodynamic and temperature and mass distribution inside thermal diffusion column

computational fluid dynamic (CFD) method is applied to solve the Navier-Stocks equations. Numerical simulations are conducted to study the main parameters in both stationary and time-dependent conditions. By using the separation work unit as a function of cut

the optimal cut for maximum SWU occurs within a limited range of 0.47-0.5 for feed rate between 0.5 and 4·g min

-1

. Our findings reveal that the optimum feed rate in the range of optimum cut is about 1 g min

-1

. In transient study

results show that the best cut for reaching to steady-state condition is

=0.5.

关键词

Keywords

references

浏览量

217

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Experimental and Numerical Study of Gas-Liquid Flow in a Sectionalized External-Loop Airlift Reactor

CFD investigation of the feasibility of polymer-based microchannel heat sink as thermal solution

Computational fluid dynamic simulations on liquid film behaviors at flooding in an inclined pipe

Calculation of Metzner Constant for Double Helical Ribbon Impeller by Computational Fluid Dynamic Method

COS generation behavior during desulfurization for H2S over zeolite in simulated blast furnace gas

Numerical study of n-heptane/benzene separation by thermal diffusion column

Numerical study of n-heptane/benzene separation by thermal diffusion column

DOI：10.1016/j.cjche.2018.10.004

摘要

Abstract

关键词

Keywords

references