Mechanism and kinetics study on removal of Iron from phosphoric acid by cation exchange resin

Xinke Leng; Yanjun Zhong; Dehua Xu; Xinlong Wang; Lin Yang

doi:10.1016/j.cjche.2018.09.012

Your Location：

Home >

Browse articles >

Mechanism and kinetics study on removal of Iron from phosphoric acid by cation exchange resin

Separation Science and Engineering | Updated：2026-01-06

- Mechanism and kinetics study on removal of Iron from phosphoric acid by cation exchange resin
- Mechanism and kinetics study on removal of Iron from phosphoric acid by cation exchange resin
- 中国化学工程学报（英文版） 2019年27卷第5期页码：1050-1057
- Affiliations：
  
  School of Chemical Engineering, Sichuan University,Chengdu,China,610065
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2018.09.012
  中图分类号：
- 纸质出版：2019
- Accepted：
Scan QR Code
Xinke Leng, Yanjun Zhong, Dehua Xu, 等. Mechanism and kinetics study on removal of Iron from phosphoric acid by cation exchange resin[J]. 中国化学工程学报（英文版）, 2019,27(5):1050-1057.

Xinke Leng, Yanjun Zhong, Dehua Xu, Xinlong Wang, Lin Yang. Mechanism and kinetics study on removal of Iron from phosphoric acid by cation exchange resin[J]. Chinese Journal of Chemical Engineering, 2019, 27(5): 1050-1057.
Xinke Leng, Yanjun Zhong, Dehua Xu, 等. Mechanism and kinetics study on removal of Iron from phosphoric acid by cation exchange resin[J]. 中国化学工程学报（英文版）, 2019,27(5):1050-1057. DOI： 10.1016/j.cjche.2018.09.012.

Xinke Leng, Yanjun Zhong, Dehua Xu, Xinlong Wang, Lin Yang. Mechanism and kinetics study on removal of Iron from phosphoric acid by cation exchange resin[J]. Chinese Journal of Chemical Engineering, 2019, 27(5): 1050-1057. DOI： 10.1016/j.cjche.2018.09.012.

摘要

Abstract

Iron element is one of the main impurities in wet-process phosphoric acid and it has a significant impact on the subsequent phosphorus chemical products. This paper studied the feasibility of using Sinco-430 cation exchange resin for iron removal from phosphoric acid. The specific surface area and the total exchange capacity of resin were 8.91 m

·g

-1

and 5.18 mmol·g

-1

respectively. The sorption mechanism was determined by FTIR and XPS and the results indicated that iron was combined with—SO

H in resin. The removal process was studied as a function of temperature

content and mass ratio between resin and solution. The unit mass of resin to remove iron was 0.058 g·g

-1

resin when the operating parameters were

=50℃

content=27.61 wt% and

S/L

=0.1

respectively. Kinetics study demonstrated that pseudo-second-order reaction model fits this study best and the calculated activation energy of overall reaction is 29.10 kJ·mol

-1

. The overall reaction process was mainly controlled by pore diffusion.

关键词

Keywords

references

浏览量

440

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Synthesis of cation exchange resin-supported iron and magnesium oxides/hydroxides composite for nitrate removal in water

Size-dependent decomposition behavior of limestone in fluidized bed calcination: Insights into fluidization, kinetics, and mechanisms

Biochar as a structure-tunable stationary phase for column chromatographic fractionation of bio-oil

Non-phosgene synthesis processes of isocyanates: One-step and two-step routes

A durable fluorine-free polyurethane-coated fabric with switchable super-wetting properties under mild pH conditions for controllable oil/water separation