High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application

Mohd Nasrullah; A. W. Zularisam; Santhana Krishnan; Mimi Sakinah; Lakhveer Singh; Yap Wing Fen

doi:10.1016/j.cjche.2018.07.021

Your Location：

Home >

Browse articles >

High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application

Energy, Resources and Environmental Technology | Updated：2026-01-06

- High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application
- High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application
- 中国化学工程学报（英文版） 2019年27卷第1期页码：208-217
- Affiliations：
  
  1. 2 Department of Biological and Ecological Engineering, Oregon State University,OR,Corvallis,USA,97333
  2. 3 Department of Physics, Faculty of Science, Universiti Putra Malaysia(UPM), Serdang,Selangor,Malaysia,43400
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2018.07.021
  中图分类号：
- 纸质出版：2019
- Accepted：
Scan QR Code
Mohd Nasrullah, A. W. Zularisam, Santhana Krishnan, 等. High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application[J]. 中国化学工程学报（英文版）, 2019,27(1):208-217.

Mohd Nasrullah, A. W. Zularisam, Santhana Krishnan, Mimi Sakinah, Lakhveer Singh, Yap Wing Fen. High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application[J]. Chin.J.Chem.Eng., 2019, 27(1): 208-217.
Mohd Nasrullah, A. W. Zularisam, Santhana Krishnan, 等. High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application[J]. 中国化学工程学报（英文版）, 2019,27(1):208-217. DOI： 10.1016/j.cjche.2018.07.021.

Mohd Nasrullah, A. W. Zularisam, Santhana Krishnan, Mimi Sakinah, Lakhveer Singh, Yap Wing Fen. High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application[J]. Chin.J.Chem.Eng., 2019, 27(1): 208-217. DOI： 10.1016/j.cjche.2018.07.021.

摘要

Abstract

Electrocoagulation process using high current intensity to treat palm oil mill effluent (POME) was investigated in this study. Various operating parameters such as electrolysis time

inter-electrode distance and initial pH were carried out to determine the efficient process condition on the removal of chemical oxygen demand (COD)

biological oxygen demand (BOD) and suspended solids (SS). The highest treatment was achieved at 50 min with the removal efficiencies for COD

BOD and SS obtained as 85%

83%

and 84%

respectively. More than 50 min treatment showed the fluctuated trends of removal efficiencies which can be considered insignificant. The application of higher current resulted in higher removals of organics while the gas bubbles also assisted in removing the pollutant particles by floatation. In an inter-electrode distance study

the removal efficiency decreased when inter-electrode distance was either higher or lower than 10 mm due to the increase of solution resistance and the decrease of anode active surface area. In initial pH study

it was found that high removal efficiencies were achieved in slightly acidic POME sample rather than in neutral or basic condition. An electrocoagulation process by using the optimum operating parameters was able to remove COD

BOD and SS up to 95%

94% and 96% respectively. The experimental results confirm that application of high current intensity in electrocoagulation provided high treatment efficiency at a reduced reaction time.

关键词

Keywords

references

浏览量

157

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Enhanced electrochemical nitrate removal from groundwater by simply calcined Ti nanopores with modified surface characters

Controllable synthesis of Ni3S2/V3S4@NF-xF(x=0, 4, 8) catalysts for efficient hydrogen production in seawater and urea electrolyte

Enhanced mass transfer in flexible electrodes of open-pore cobalt disulfide nanosheets supported on sulfur-doped carbon fibers for efficient zinc-air batteries

Dew-point corrosion process in the atmospheric tower: Integration of electrochemical analysis and interpretable machine learning

Bio-templated graphitic carbon architectures enable high-rate and durable LiFePO4 cathodes for sustainable lithium-ion batteries