Electrochemical behaviors of anode materials and their performance for bauxite desulfurization

Yingnan Hu; Aijing Lü; Mingyong Wang; Dong Wang; Junhao Liu; Zhi Wang; Xuzhong Gong

doi:10.1016/j.cjche.2018.04.028

Your Location：

Home >

Browse articles >

Electrochemical behaviors of anode materials and their performance for bauxite desulfurization

Separation Science and Engineering | Updated：2026-01-06

- Electrochemical behaviors of anode materials and their performance for bauxite desulfurization
- Electrochemical behaviors of anode materials and their performance for bauxite desulfurization
- 中国化学工程学报（英文版） 2019年27卷第4期页码：802-810
- Affiliations：
  
  1. National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences,Beijing,China,100190
  2. University of Chinese Academy of Sciences,Beijing,China,100049
  3. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing,Beijing,China,100083
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2018.04.028
  中图分类号：
- 纸质出版：2019
- Accepted：
Scan QR Code
Yingnan Hu, Aijing Lü, Mingyong Wang, 等. Electrochemical behaviors of anode materials and their performance for bauxite desulfurization[J]. 中国化学工程学报（英文版）, 2019,27(4):802-810.

Yingnan Hu, Aijing Lü, Mingyong Wang, Dong Wang, Junhao Liu, Zhi Wang, Xuzhong Gong. Electrochemical behaviors of anode materials and their performance for bauxite desulfurization[J]. Chinese Journal of Chemical Engineering, 2019, 27(4): 802-810.
Yingnan Hu, Aijing Lü, Mingyong Wang, 等. Electrochemical behaviors of anode materials and their performance for bauxite desulfurization[J]. 中国化学工程学报（英文版）, 2019,27(4):802-810. DOI： 10.1016/j.cjche.2018.04.028.

Yingnan Hu, Aijing Lü, Mingyong Wang, Dong Wang, Junhao Liu, Zhi Wang, Xuzhong Gong. Electrochemical behaviors of anode materials and their performance for bauxite desulfurization[J]. Chinese Journal of Chemical Engineering, 2019, 27(4): 802-810. DOI： 10.1016/j.cjche.2018.04.028.

摘要

Abstract

Pyrite inside bauxite could be oxidized into soluble S-containing ions by electrolysis

and thus achieving bauxite desulfurization by using filtration. However

S-containing ions in electrolyte had some corrosion effects on electrode

especially for anode. In this work

six kinds of traditional materials were selected as anode

and their corrosion behaviors were examined by using electrochemistry characterization. Tafel and CV curves from simulating electrolyte suggested that their corrosion potentials were in the following order:Ni C SS Fe Cu Pb-Ag. As expected

the desulfurization ratio and cell voltage from bauxite electrolysis were in the following order respectively:Cu Ni Fe SS C Pb-Ag and Ni Fe SS Cu C Pb-Ag. Finally

Ni was proposed a kind of excellent electrode material for bauxite desulfurization from electrolysis.

关键词

Keywords

references

浏览量

181

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Enhanced corrosion resistance of epoxy resin coating via addition of CeO2 and benzotriazole

Effect of modified MgAl-LDH coating on corrosion resistance and friction properties of aluminum alloy

Enhanced mass transfer in flexible electrodes of open-pore cobalt disulfide nanosheets supported on sulfur-doped carbon fibers for efficient zinc-air batteries

Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis

Non-phosgene synthesis processes of isocyanates: One-step and two-step routes