n-Decane hydro-conversion over bi-and tri-metallic Al-HMS catalyst in a mini-reactor

Mahdi Abdi-Khanghah; Mostafa Adelizadeh; Zahra Naserzadeh; Zhi'en Zhang

doi:10.1016/j.cjche.2018.04.007

Your Location：

Home >

Browse articles >

n-Decane hydro-conversion over bi-and tri-metallic Al-HMS catalyst in a mini-reactor

Catalytic reactor & ISMR | Updated：2026-01-06

- n-Decane hydro-conversion over bi-and tri-metallic Al-HMS catalyst in a mini-reactor
- n-Decane hydro-conversion over bi-and tri-metallic Al-HMS catalyst in a mini-reactor
- 中国化学工程学报（英文版） 2018年第6期页码：1330-1339
- Affiliations：
  
  1. Department of Chemical Engineering, Petroleum University of Technology, Ahwaz,Iran
  2. 2 Department of Environmental Engineering, Azad University of Rudehen, Tehran,Iran
  3. 3 Industrial Safety and HSE Department, Faculty of Engineering, Kar Higher Education Institute, Qazvin,Iran
  4. 4 College of Chemistry and Chemical Engineering, Chongqing University of Technology,Chongqing,China,400054
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2018.04.007
  中图分类号：
- 纸质出版：2018
- Accepted：
Scan QR Code
Mahdi Abdi-Khanghah, Mostafa Adelizadeh, Zahra Naserzadeh, 等. n-Decane hydro-conversion over bi-and tri-metallic Al-HMS catalyst in a mini-reactor[J]. 中国化学工程学报（英文版）, 2018,(6):1330-1339.

Mahdi Abdi-Khanghah, Mostafa Adelizadeh, Zahra Naserzadeh, et al. n-Decane hydro-conversion over bi-and tri-metallic Al-HMS catalyst in a mini-reactor[J]. Chinese Journal of Chemical Engineering, 2018, (6): 1330-1339.
Mahdi Abdi-Khanghah, Mostafa Adelizadeh, Zahra Naserzadeh, 等. n-Decane hydro-conversion over bi-and tri-metallic Al-HMS catalyst in a mini-reactor[J]. 中国化学工程学报（英文版）, 2018,(6):1330-1339. DOI： 10.1016/j.cjche.2018.04.007.

Mahdi Abdi-Khanghah, Mostafa Adelizadeh, Zahra Naserzadeh, et al. n-Decane hydro-conversion over bi-and tri-metallic Al-HMS catalyst in a mini-reactor[J]. Chinese Journal of Chemical Engineering, 2018, (6): 1330-1339. DOI： 10.1016/j.cjche.2018.04.007.

摘要

Abstract

Bi-metallic (Pt-Sn and Sn-Ni) and tri-metallic (Pt-Sn-Ni) catalysts

supported on Al-containing hexagonal mesoporous silica (Al-HMS) (Si/Al=20) materials

were synthesized. N

adsorption-desorption

X-ray diffraction (XRD)

Brunauer-Emmett-Teller (BET) test

and temperature programed desorption (NH3-TPD) were used to characterize physicochemical characteristics and textural properties of the Al-HMS catalysts. Catalytic performances on hydro-cracking of n-decane at different reaction conditions were studied in a microreactor. Comparison between Pt-Sn

Sn-Ni and Pt-Sn-Ni catalyst under different hydro-cracking conditions was made. The experimental results indicate that the proper balance between the acid and metal functions is the key in synthesizing a catalyst with a better performance in hydro-cracking. Tri-metallic catalyst exhibits the best catalytic performance in n-decane hydro-cracking than two bi-metallic catalysts.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Nano-confinement construction of FeCo@NCNTs nanocomposite for pH-universal oxygen reduction catalysis and high-power Zn-air battery

CO2 leakage behavior from CO2 hydrate-liquid CO2-seawater coexistence system in unsealed sediments

Recovery rubidium chloride and cyclic utilization of hexacyanoferrate(II) ion from hexacyanoferrate-internediate solutions via solvent extraction

Fluorinated poly(p-terphenyl isatin)-based anion exchange membranes with microphase-separated structures for water electrolysis

CFD-PBM simulation of liquid-liquid dispersions in an industrial pulsed disc and doughnut column with directly measured breakup and coalescence kernels