High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide
Catalysis|Updated:2026-01-06
|
High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide
High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide
中国化学工程学报(英文版)2018年第6期 页码:1285-1291
Affiliations:
State Key Laboratory of Chemical Engineering, East China University of Science and Technology,Shanghai,China,200237
Author bio:
Funds:
Supported by the National Key Research and Development Program of China (2016YFB0302702), the National Natural Science Foundation of China (21676083), the Shanghai Rising-Star Program (16QB140130) and the 111 Project (B08021).
Zhenhao Xi, Tian Liu, Wei Si, 等. High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide[J]. 中国化学工程学报(英文版), 2018,(6):1285-1291.
Zhenhao Xi, Tian Liu, Wei Si, et al. High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide[J]. Chinese Journal of Chemical Engineering, 2018, (6): 1285-1291.
Zhenhao Xi, Tian Liu, Wei Si, 等. High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide[J]. 中国化学工程学报(英文版), 2018,(6):1285-1291.DOI: 10.1016/j.cjche.2018.03.007.
Zhenhao Xi, Tian Liu, Wei Si, et al. High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide[J]. Chinese Journal of Chemical Engineering, 2018, (6): 1285-1291.DOI: 10.1016/j.cjche.2018.03.007.
High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide
The concentration of acetaldehyde (AA) is the main quality index of poly(ethylene terephthalate) (PET) used in food and drink packaging. A new method for AA removal has been developed by using supercritical carbon dioxide (scCO
2
) during the solid-state polycondensation of PET. The influence factors of AA removal including the temperature
pressure
reaction time and the size of pre-polymer particles are systematically studied in this work. The results indicate that it is a highly efficient way to obtain high molecular weight PET with relative low concentration of AA. Correspondingly
the polymerization degree of PET could increase from 27.9 to 85.6 while the concentration of AA reduces from 0.229×10
-6
to 0.055×10
-6
under the optimal operation conditions of 230℃
8 MPa and size of 0.30-0.45 mm. Thermodynamic performance tests show the increasing extent of PET crystallinity due to the fact that the plasticization of scCO
2
is not obvious with extended reaction time
therefore the increasing crystallinity has no significant influence on AA removal. SEM observations reveal that the effects of scCO
2
-induced plasticization and swelling on PET inc
rease significantly with the decrease of prepolymer size
and the surface of PET becomes more loose and porous in favor of the AA removal.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.