Catalyst-free and solvent-free oxidation of cycloalkanes (C5-C8) with molecular oxygen: Determination of autoxidation temperature and product distribution
Catalysis, Kinetics and Reaction Engineering|Updated:2026-01-06
|
Catalyst-free and solvent-free oxidation of cycloalkanes (C5-C8) with molecular oxygen: Determination of autoxidation temperature and product distribution
Catalyst-free and solvent-free oxidation of cycloalkanes (C5-C8) with molecular oxygen: Determination of autoxidation temperature and product distribution
中国化学工程学报(英文版)2018年26卷第5期 页码:1064-1070
Affiliations:
State Key Laboratory Breeding Base of Green Chemistry-Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology,Hangzhou,China,310014
Haimin Shen, Yan Wang, Jinhui Deng, 等. Catalyst-free and solvent-free oxidation of cycloalkanes (C5-C8) with molecular oxygen: Determination of autoxidation temperature and product distribution[J]. 中国化学工程学报(英文版), 2018,26(5):1064-1070.
Haimin Shen, Yan Wang, Jinhui Deng, Long Zhang, Yuanbin She. Catalyst-free and solvent-free oxidation of cycloalkanes (C5-C8) with molecular oxygen: Determination of autoxidation temperature and product distribution[J]. Chin.J.Chem.Eng., 2018, 26(5): 1064-1070.
Haimin Shen, Yan Wang, Jinhui Deng, 等. Catalyst-free and solvent-free oxidation of cycloalkanes (C5-C8) with molecular oxygen: Determination of autoxidation temperature and product distribution[J]. 中国化学工程学报(英文版), 2018,26(5):1064-1070.DOI: 10.1016/j.cjche.2018.02.019.
Haimin Shen, Yan Wang, Jinhui Deng, Long Zhang, Yuanbin She. Catalyst-free and solvent-free oxidation of cycloalkanes (C5-C8) with molecular oxygen: Determination of autoxidation temperature and product distribution[J]. Chin.J.Chem.Eng., 2018, 26(5): 1064-1070.DOI: 10.1016/j.cjche.2018.02.019.
Catalyst-free and solvent-free oxidation of cycloalkanes (C5-C8) with molecular oxygen: Determination of autoxidation temperature and product distribution
Autoxidation of cycloalkanes (C5-C8) with molecular oxygen under catalyst-free and solvent-free conditions was conducted systematically for the first time
focusing on the autoxidation temperature and product distribution. The autoxidation of cyclopentane
cyclohexane
cycloheptane and cyclooctane occurs at 120℃
130℃
120℃
and 105℃ respectively
with obvious oxidized products formation. At 140℃
145℃
130℃ and 125℃
acceptable yields of the oxidized products could be obtained for them
and the oxidized product distributions were investigated in detail. The autoxidation of cycloalkanes follows the pseudo-first-order kinetic model and the apparent activation energies (E
a
) for the autoxidation of cyclopentane and cyclohexane are 159.76 kJ·mol
-1
and 86.75 kJ·mol
-1
respectively. This study can act as an important reference in screen of suitable reaction temperature and comparison of the performance of various catalysts in the catalytic oxidation of cycloalkanes in the attempt to enhance the oxidized product selectivity.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Removal of phenol via regulation of surface hybridization structure of activated carbon catalysts for persulfacte activation
Enhancing corrosion resistance of heat-assisted forming titanium bipolar plate for proton exchange membrane fuel cell through optimized heat treatment
Acid gas combustion in the inverse diffusion flame for increasing flame temperature under low-level oxygen enrichment conditions
Electrocatalytic glucose oxidation activity of Ni/CNT composites based on low-temperature discharge synthesis
Investigation of reaction pathways and kinetics in the gas-phase noncatalytic oxidation of hexafluoropropylene
相关作者
Xiao Liang
Xu Jiahui
Dai Jiawei
Qiu Yiyang
Meng Xueting
Lan Guojun
Sun Xiucheng
Cheng Zaizhe
相关机构
Xiangjiang Laboratory
Zhejiang Key Laboratory of Surface and Interface Science and Engineering for Catalysts, College of Chemical Engineering, Zhejiang University of Technology
New Energy Automotive Engineering Center, Tongji University
School of Automotive Studies, Tongji University
School of Mechanical Engineering, Tongji University