Adiabatic correction for the esterification of acetic anhydride by methanol via accurate kinetics

Ze Dong; Liping Chen; Yingying Ma; Haoliang Peng; Wanghua Chen

doi:10.1016/j.cjche.2017.10.005

Your Location：

Home >

Browse articles >

Adiabatic correction for the esterification of acetic anhydride by methanol via accurate kinetics

Process Systems Engineering and Process Safety | Updated：2026-01-06

- Adiabatic correction for the esterification of acetic anhydride by methanol via accurate kinetics
- Adiabatic correction for the esterification of acetic anhydride by methanol via accurate kinetics
- 中国化学工程学报（英文版） 2018年26卷第9期页码：1954-1959
- Affiliations：
  
  2 Solvay(China) Co., Ltd.,Shanghai,China,201108
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2017.10.005
  中图分类号：
- 纸质出版：2018
- Accepted：
Scan QR Code
Ze Dong, Liping Chen, Yingying Ma, 等. Adiabatic correction for the esterification of acetic anhydride by methanol via accurate kinetics[J]. 中国化学工程学报（英文版）, 2018,26(9):1954-1959.

accurate kinetics[J]. Chinese Journal of Chemical Engineering, 2018, 26(9): 1954-1959.
Ze Dong, Liping Chen, Yingying Ma, 等. Adiabatic correction for the esterification of acetic anhydride by methanol via accurate kinetics[J]. 中国化学工程学报（英文版）, 2018,26(9):1954-1959. DOI： 10.1016/j.cjche.2017.10.005.

accurate kinetics[J]. Chinese Journal of Chemical Engineering, 2018, 26(9): 1954-1959. DOI： 10.1016/j.cjche.2017.10.005.

摘要

Abstract

In the field of adiabatic correction for complex reactions

a simple one-stage kinetic model was used to estimate the real reaction kinetics. However

this assumption simplified the real process

inevitably generated inaccurate or even unsafe results. Therefore

it was necessary to find a new correction method for complex reactions. In this work

esterification of acetic anhydride by methanol was chosen as an object reaction of study. The reaction was studied under different conditions by Reaction Calorimeter (RC1). Then

Thermal Safety Software (TSS) was used to establish the kinetic model and estimate the parameters

where

activation energies for three stages were 67.09

81.02

73.77 kJ·mol

-1

respectively

and corresponding frequency factors in logarithmic form were 16.05

19.59

15.72 s

-1

. In addition

two adiabatic tests were performed by Vent Sizing Package2 (VSP2). For accurate correction of VSP2 tests

a new correction method based on Enhanced Fisher method was proposed. Combined with kinetics

adiabatic correction of esterification reaction was achieved. Through this research

accurate kinetic parameters for a three-step kinetic model of

the esterification reaction were acquired. Furthermore

the correlation coefficients between simulated curves and corrected curves were 0.976 and 0.968

which proved the accuracy of proposed new adiabatic correction method. Based on this new method

conservative corrected results were able to be acquired and be applied in safety assessment.

关键词

Keywords

references

浏览量

134

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Complete kinetic model for esterification reaction of lauric acid with glycerol to synthesize glycerol monolaurate

Esterification of acetic acid with isobutanol catalyzed by ionic liquid n-sulfopropyl-3-methylpyridinium trifluoromethanesulfonate: Experimental and kinetic study

Liquid-phase esterification of methacrylic acid with methanol catalyzed by cation-exchange resin in a fixed bed reactor: Experimental and kinetic studies

Reaction kinetics for the heterogeneously resin-catalyzed and homogeneously self-catalyzed esterification of thioglycolic acid with 2-ethyl-1-hexanol

Preparation of solid acid catalyst SO42-/TiO2/γ-Al2O3 for esterification: A study on catalytic reaction mechanism and kinetics