Adsorptive potential of Acacia nilotica based adsorbent for chromium(VI) from an aqueous phase

Raza Khalid; Zaheer Aslam; Aamir Abbas; Waqar Ahmad; Naveed Ramzan; Reyad Shawabkeh

doi:10.1016/j.cjche.2017.08.017

Your Location：

Home >

Browse articles >

Adsorptive potential of Acacia nilotica based adsorbent for chromium(VI) from an aqueous phase

Energy, Resources and Environmental Technology | Updated：2026-01-06

- Adsorptive potential of Acacia nilotica based adsorbent for chromium(VI) from an aqueous phase
- Adsorptive potential of Acacia nilotica based adsorbent for chromium(VI) from an aqueous phase
- 中国化学工程学报（英文版） 2018年26卷第3期页码：614-622
- Affiliations：
  
  2 Department of Chemical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2017.08.017
  中图分类号：
- 纸质出版：2018
- Accepted：
Scan QR Code
Raza Khalid, Zaheer Aslam, Aamir Abbas, 等. Adsorptive potential of Acacia nilotica based adsorbent for chromium(VI) from an aqueous phase[J]. 中国化学工程学报（英文版）, 2018,26(3):614-622.

based adsorbent for chromium(VI) from an aqueous phase[J]. Chinese Journal of Chemical Engineering, 2018, 26(3): 614-622.
Raza Khalid, Zaheer Aslam, Aamir Abbas, 等. Adsorptive potential of Acacia nilotica based adsorbent for chromium(VI) from an aqueous phase[J]. 中国化学工程学报（英文版）, 2018,26(3):614-622. DOI： 10.1016/j.cjche.2017.08.017.

based adsorbent for chromium(VI) from an aqueous phase[J]. Chinese Journal of Chemical Engineering, 2018, 26(3): 614-622. DOI： 10.1016/j.cjche.2017.08.017.

摘要

Abstract

The objective of this research was to enhance adsorption capacity of Acacia nilotica (keekar) sawdust for the abatement of chromium bearing wastewater and to investigate the effect of process parameters on adsorption capacity. The sawdust was activated by acid wash and functionalized subsequently with formaldehyde. Functionalization of activated sawdust raised its chromium removal efficiency of almost 10% as compared to its adsorption removal efficiency of HCl treated sawdust in a batch adsorption study. Adsorption kinetic data provided better fitting with pseudo second order model. Maximum adsorption capacity calculated through the best fitting Langmuir model was 6.34 mg·g

-1

and 8.2 mg·g

-1

for HCl treated and formaldehyde functionalized sawdust adsorbents

respectively. The adsorption of Cr(VI) was endothermic when studied by varying temperature from 20℃ to 50℃ for both activated and functionalized adsorbents.

关键词

Keywords

references

浏览量

206

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Fabricating amide functional group modified hyper-cross-linked adsorption resin with enhanced adsorption and recognition performance for 5-hydroxymethylfurfural adsorption via simple one-step

Static and dynamic studies of adsorption by four macroporous resins to enrich oridonin from Rabdosia rubescens

Studies on batch adsorptive removal of cadmium and nickel from synthetic waste water using silty clay originated from Balochistan- Pakistan

Assessment of Cu (II) removal from an aqueous solution by raw Gundelia tournefortii as a new low-cost biosorbent: Experiments and modelling

Synthesis of a novel functional group-bridged magnetized bentonite adsorbent: Characterization, kinetics, isotherm, thermodynamics and regeneration