From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption

Syieluing Wong; Nurul Atiqah Najlaa Yac'cob; Norzita Ngadi; Onn Hassan; Ibrahim M. Inuwa

doi:10.1016/j.cjche.2017.07.015

Your Location：

Home >

Browse articles >

From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption

Energy, Resources and Environmental Technology | Updated：2026-01-06

- From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption
- From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption
- 中国化学工程学报（英文版） 2018年26卷第4期页码：870-878
- Affiliations：
  
  2 Department of Industrial Chemistry, Kaduna State University, Kaduna,Nigeria
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2017.07.015
  中图分类号：
- 纸质出版：2018
- Accepted：
Scan QR Code
Syieluing Wong, Nurul Atiqah Najlaa Yac'cob, Norzita Ngadi, 等. From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption[J]. 中国化学工程学报（英文版）, 2018,26(4):870-878.

Syieluing Wong, Nurul Atiqah Najlaa Yac'cob, Norzita Ngadi, Onn Hassan, Ibrahim M. Inuwa. From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption[J]. Chin.J.Chem.Eng., 2018, 26(4): 870-878.
Syieluing Wong, Nurul Atiqah Najlaa Yac'cob, Norzita Ngadi, 等. From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption[J]. 中国化学工程学报（英文版）, 2018,26(4):870-878. DOI： 10.1016/j.cjche.2017.07.015.

Syieluing Wong, Nurul Atiqah Najlaa Yac'cob, Norzita Ngadi, Onn Hassan, Ibrahim M. Inuwa. From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption[J]. Chin.J.Chem.Eng., 2018, 26(4): 870-878. DOI： 10.1016/j.cjche.2017.07.015.

摘要

Abstract

Adsorption is an important process in wastewater treatment

and conversion of waste materials to adsorbent offers a solution to high material cost related to the use of commercial activated carbon. This study investigated the adsorption behaviour of Reactive Black 5 (RB5) and methylene blue (MB) onto activated carbon produced from textile sludge (TSAC). The activated carbon was synthesized through chemical activation of precursor followed with carbonization at 650℃ under nitrogen flow. Effects of time (0-200 min)

pH (2-10)

temperature (25-60℃)

initial dye concentration (0-200 mg·L

-1

)

and adsorbent dosage (0.01-0.15 g) on dye removal efficiency were investigated. Preliminary screening revealed that TSAC synthesized via H

activation showed higher adsorption behaviour than TSAC activated by KCl and ZnCl

. The adsorption capacity of TSAC was found to be 11.98 mg·g

-1

(RB5) and 13.27 mg·g

-1

(MB)

and is dependent on adsorption time and initial dye concentration. The adsorption data for both dyes were well fitted to Freundlich isotherm model which explains the heterogeneous natur

e of TSAC surface. The dye adsorption obeyed pseudo-second order kinetic model

thus chemisorption was the controlling step. This study reveals potential of textile sludge in removal of dyes from aqueous solution

and further studies are required to establish the applicability of the synthesized adsorbent for the treatment of waste water containing toxic dyes from textile industry.

关键词

Keywords

references

浏览量

501

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Mesoporous activated carbon-zeolite composite prepared from waste macadamia nut shell and synthetic faujasite

Boosting high-energy-density zinc-ion capacitors with an ultra-stable redox mediator

The Ce-modified biochar for efficient removal of methylene blue dye: Kinetics, isotherms and reusability studies

Construction of hydrophobic CuCl@AC–PTFE composites with an enhanced Cu(I) stability for efficient CO adsorption

Evaluation of phenanthrene removal from soil washing effluent by activated carbon adsorption using response surface methodology