Hierarchical pore structure of activated carbon fabricated by CO<sub>2</sub>/microwave for volatile organic compounds adsorption

Wenjuan Qiu; Kang Dou; Ying Zhou; Haifeng Huang; Yinfei Chen; Hanfeng Lu

doi:10.1016/j.cjche.2017.04.006

Your Location：

Home >

Browse articles >

Hierarchical pore structure of activated carbon fabricated by CO₂/microwave for volatile organic compounds adsorption

Separation Science and Engineering | Updated：2026-01-06

- Hierarchical pore structure of activated carbon fabricated by CO₂/microwave for volatile organic compounds adsorption
- Hierarchical pore structure of activated carbon fabricated by CO₂/microwave for volatile organic compounds adsorption
- 中国化学工程学报（英文版） 2018年26卷第1期页码：81-88
- Affiliations：
  
  2 College of Chemical Engineering, Zhejiang University of Technology,Hangzhou,China,310014
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2017.04.006
  中图分类号：
- 纸质出版：2018
- Accepted：
Scan QR Code
Wenjuan Qiu, Kang Dou, Ying Zhou, 等. Hierarchical pore structure of activated carbon fabricated by CO₂/microwave for volatile organic compounds adsorption[J]. 中国化学工程学报（英文版）, 2018,26(1):81-88. DOI: 10.1016/j.cjche.2017.04.006.

/microwave for volatile organic compounds adsorption[J]. Chinese Journal of Chemical Engineering, 2018, 26(1): 81-88.
Wenjuan Qiu, Kang Dou, Ying Zhou, 等. Hierarchical pore structure of activated carbon fabricated by CO₂/microwave for volatile organic compounds adsorption[J]. 中国化学工程学报（英文版）, 2018,26(1):81-88. DOI: 10.1016/j.cjche.2017.04.006. DOI：

/microwave for volatile organic compounds adsorption[J]. Chinese Journal of Chemical Engineering, 2018, 26(1): 81-88. DOI： 10.1016/j.cjche.2017.04.006.

摘要

Abstract

An activated carbon pore-expanding technique was achieved through innovative reactivation by CO

/microwave. The original and modified activated carbons were characterized by nitrogen adsorption-desorption

scanning electron microscopy

transmission electron microcopy

and Fourier transform infrared spectroscopy. The mesopore volume increased from 0.122 cm

·g

-1

to 0.270 cm

·g

-1

and a hierarchical pore structure was formed. A gradual decrease in the phenolic hydroxyl and carboxyl groups on the surface of activated carbon enhanced the surface inertia of granular activated carbon (GAC). The toluene desorption rate of the modified sample increased by 8.81% compared with that of the original GAC. Adsorption isotherm fittings revealed that the Langmuir model was applicable for the original and modified activated carbons. The isosteric adsorption heat of toluene on the activated carbon decreased by approximately 50%

which endowed the modified sample with excellent stability in application. The modified samples showed an enhanced desorption performance of toluene

thereby opening a way to extend the cycle life and

improve the economic performance of carbon adsorbent in practical engineering applications.

关键词

Keywords

references

浏览量

161

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

A mini-review on the modeling of volatile organic compound adsorption in activated carbons: Equilibrium, dynamics, and heat effects

Removal of phenol via regulation of surface hybridization structure of activated carbon catalysts for persulfacte activation

Numerical simulation of multicomponent hydrocarbon flow and heat transfer in a regenerative catalytic oxidizer

Boosting high-energy-density zinc-ion capacitors with an ultra-stable redox mediator

Synergistic effect between nitrogen-doped sites and metal chloride for carbon supported extra-low mercury catalysts in acetylene hydrochlorination

Hierarchical pore structure of activated carbon fabricated by CO2/microwave for volatile organic compounds adsorption

Hierarchical pore structure of activated carbon fabricated by CO2/microwave for volatile organic compounds adsorption

DOI：10.1016/j.cjche.2017.04.006

摘要

Abstract

关键词

Keywords

references

Hierarchical pore structure of activated carbon fabricated by CO₂/microwave for volatile organic compounds adsorption

Hierarchical pore structure of activated carbon fabricated by CO₂/microwave for volatile organic compounds adsorption