Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow

Dongwei Zhang; Hanzhong Tao; Yuan Xu; Zishuai Sun

doi:10.1016/j.cjche.2017.03.038

Your Location：

Home >

Browse articles >

Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow

Fluid Dynamics and Transport Phenomena | Updated：2026-01-06

- Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow
- Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow
- 中国化学工程学报（英文版） 2018年26卷第3期页码：437-444
- Affiliations：
  
  2 The Corporation of Towngas,Changzhou,China,213000
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2017.03.038
  中图分类号：
- 纸质出版：2018
- Accepted：
Scan QR Code
Dongwei Zhang, Hanzhong Tao, Yuan Xu, 等. Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow[J]. 中国化学工程学报（英文版）, 2018,26(3):437-444.

Dongwei Zhang, Hanzhong Tao, Yuan Xu, Zishuai Sun. Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow[J]. Chin.J.Chem.Eng., 2018, 26(3): 437-444.
Dongwei Zhang, Hanzhong Tao, Yuan Xu, 等. Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow[J]. 中国化学工程学报（英文版）, 2018,26(3):437-444. DOI： 10.1016/j.cjche.2017.03.038.

Dongwei Zhang, Hanzhong Tao, Yuan Xu, Zishuai Sun. Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow[J]. Chin.J.Chem.Eng., 2018, 26(3): 437-444. DOI： 10.1016/j.cjche.2017.03.038.

摘要

Abstract

Based on finite volume method

the pressure drop and heat transfer characteristics of one smooth tube and ten different axisymmetric corrugated tubes

including two with uniform corrugation and eight with non-uniform corrugation

have been studied. A physical model of the corrugated tube was built

then the numerical simulation of the model was carried out and the numerical simulation results were compared with the empirical formula. The results show that:the friction factor decreases with the increase of Reynolds number ranging from 6000 to 57000

the value of which in the corrugated tubes with non-uniform corrugation (tube 03-10) are smaller than those with uniform corrugation (tube 01-02). The geometry parameters of tube (01) have advantages on the heat transfer enhancement in low Reynolds number flow region (from 6000 to 13000) and tube (07-08) have advantages on the heat transfer enhancement in high Reynolds number flow region (from 13000 to 57000). The vortex

existed in each area between two adjacent corrugations called second flow region

is the root of the enhancement on heat transfer in the corrugated tubes. The effectiveness factor decreases with the increasing of Reynolds number and the performances of the corrugated tubes with pitch of 12.5 mm have advantages than these of 10 mm under the same corrugation geometric parameter.

关键词

Keywords

references

浏览量

167

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger

Optimization of chemical looping hydrogen generation process via Aspen Plus—Machine learning integration

Experimental study on hydrogen explosion venting and flame arresting under different metal copper foam structures

Numerical simulation of multicomponent hydrocarbon flow and heat transfer in a regenerative catalytic oxidizer

Source term estimation of hazardous gas leakages under turbulent atmospheric transport dispersion scenarios