Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace

Zhou Fang; Tong Qiu; Weiguo Zhou

doi:10.1016/j.cjche.2017.03.020

Your Location：

Home >

Browse articles >

Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace

Article | Updated：2026-01-06

- Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace
- Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace
- 中国化学工程学报（英文版） 2017年25卷第8期页码：1091-1100
- Affiliations：
  
  Department of Chemical Engineering, Tsinghua University,Beijing,China,100084
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2017.03.020
  中图分类号：
- 纸质出版：2017
- Accepted：
Scan QR Code
Zhou Fang, Tong Qiu, Weiguo Zhou. Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace[J]. 中国化学工程学报（英文版）, 2017,25(8):1091-1100.

Zhou Fang, Tong Qiu, Weiguo Zhou. Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace[J]. , 2017, 25(8): 1091-1100.
Zhou Fang, Tong Qiu, Weiguo Zhou. Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace[J]. 中国化学工程学报（英文版）, 2017,25(8):1091-1100. DOI： 10.1016/j.cjche.2017.03.020.

Zhou Fang, Tong Qiu, Weiguo Zhou. Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace[J]. , 2017, 25(8): 1091-1100. DOI： 10.1016/j.cjche.2017.03.020.

摘要

Abstract

A coupled system simulating both firebox and reactor is established to study the naphtha pyrolysis in an industrial tubular furnace. The firebox model is based on zone method including combustion

radiation

and convection to simulate heat transfer in the furnace. A two-dimensional recirculation model is proposed to estimate the flow field in furnace. The reactor model integrates the feedstock reconstruction model

an auto-generator of detail kinetic schemes

and the reactor simulation model to simulate the reaction process in the tubular coil. The coupled simulation result is compared with industrial process and shows agreement within short computation time.

关键词

Keywords

references

浏览量

179

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Effects of Sorbents on the Partitioning and Speciation of Cu During Municipal Solid Waste Incineration

Enhanced plasma-catalytic steam reforming of methane to methanol on a hydrophobically modified Cu/silicalite-1 catalyst

A durable fluorine-free polyurethane-coated fabric with switchable super-wetting properties under mild pH conditions for controllable oil/water separation

Tailoring the molecular structure of cross-linked poly(ethylene oxide) membranes for enhanced CO2 permeation

COS generation behavior during desulfurization for H2S over zeolite in simulated blast furnace gas