Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process

Xiaolong Ge; Botong Liu; Xigang Yuan; Yiqing Luo; Kuo-Ksong Yu

doi:10.1016/j.cjche.2017.03.018

Your Location：

Home >

Browse articles >

Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process

Article | Updated：2026-01-06

- Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process
- Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process
- 中国化学工程学报（英文版） 2017年25卷第8期页码：1069-1078
- Affiliations：
  
  1. College of Chemical Engineering and Materials and Science, Tianjin Key Laboratory of Marine Resources and Chemistry, Tianjin University of Science and Technology,Tianjin,China,300457
  2. State Key Laboratory of Chemical Engineering, Tianjin University,Tianjin,China,300354
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2017.03.018
  中图分类号：
- 纸质出版：2017
- Accepted：
Scan QR Code
Xiaolong Ge, Botong Liu, Xigang Yuan, 等. Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process[J]. 中国化学工程学报（英文版）, 2017,25(8):1069-1078.

Xiaolong Ge, Botong Liu, Xigang Yuan, Yiqing Luo, Kuo-Ksong Yu. Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process[J]. , 2017, 25(8): 1069-1078.
Xiaolong Ge, Botong Liu, Xigang Yuan, 等. Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process[J]. 中国化学工程学报（英文版）, 2017,25(8):1069-1078. DOI： 10.1016/j.cjche.2017.03.018.

Xiaolong Ge, Botong Liu, Xigang Yuan, Yiqing Luo, Kuo-Ksong Yu. Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process[J]. , 2017, 25(8): 1069-1078. DOI： 10.1016/j.cjche.2017.03.018.

摘要

Abstract

Dividing wall column (DWC) is shown to be energy efficient compared to conventional column sequence for multi components separation

which is used for olefin separation in fluidization methanol to propylene process in the present work. Detailed design for pilot DWC was performed and five control structures

i.e. composition control (CC)

temperature control (TC)

composition-temperature control (CC-TC)

temperature difference control (TDC)

double temperature difference control (DTDC) were proposed to circumvent feed disturbance. Sensitivity analysis and singular value decomposition (SVD) were used as criterion to select the controlled temperature locations in TC

CC-TC

TDC and DTDC control loops. The steady simulation result demonstrates that 25.7% and 30.2% duty can be saved for condenser and reboiler by substituting conventional column sequence with DWC

respectively. As for control structure selection

TC and TDC perform better than other three control schemes with smaller maximum deviation and shorter settling time.

关键词

Keywords

references

浏览量

283

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Energy-saving design and optimization of pressure-swing-assisted ternary heterogenous azeotropic distillations

Proportion integral-type active disturbance rejection generalized predictive control for distillation process based on grey wolf optimization parameter tuning

Collaborative control of array integrated distillation units via multi-agents technique

Improved neural network automation design method for energy saving and carbon emission reduction of petrochemical production processes

Novel intensification strategy for the liquid-only transfer dividing wall column separating ternary mixtures based on the column grand composite curve