Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations

Lei Huang; Lin Qi; Hongna Wang; Jinli Zhang; Xiaoqiang Jia

doi:10.1016/j.cjche.2017.03.017

Your Location：

Home >

Browse articles >

Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations

Article | Updated：2026-01-06

- Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations
- Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations
- 中国化学工程学报（英文版） 2017年25卷第8期页码：1101-1108
- Affiliations：
  
  1. Department of Biochemical Engineering, School of Chemical Engineering and Technology, Tianjin University,Tianjin,China,300072
  2. Key Laboratory of Systems Bioengineering(Ministry of Education), Tianjin University,Tianjin,China,300072
  3. SynBio Research Platform, Collaborative Innovation Center of Chemical Science and Engineering(Tianjin), School of Chemical Engineering and Technology, Tianjin University,Tianjin,China,300072
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2017.03.017
  中图分类号：
- 纸质出版：2017
- Accepted：
Scan QR Code
Lei Huang, Lin Qi, Hongna Wang, 等. Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations[J]. 中国化学工程学报（英文版）, 2017,25(8):1101-1108.

Lei Huang, Lin Qi, Hongna Wang, Jinli Zhang, Xiaoqiang Jia. Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations[J]. , 2017, 25(8): 1101-1108.
Lei Huang, Lin Qi, Hongna Wang, 等. Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations[J]. 中国化学工程学报（英文版）, 2017,25(8):1101-1108. DOI： 10.1016/j.cjche.2017.03.017.

Lei Huang, Lin Qi, Hongna Wang, Jinli Zhang, Xiaoqiang Jia. Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations[J]. , 2017, 25(8): 1101-1108. DOI： 10.1016/j.cjche.2017.03.017.

摘要

Abstract

Heat exchangers play an important role in supercritical water coal gasification systems for heating feed and cooling products. However

serious deposition and plugging problems always exist in heat exchangers. CFD modeling was used to simulate the transport characteristics of solid particles in supercritical water through the shell and tube of heat exchangers to alleviate the problems. In this paper

we discuss seven types of exchangers (A

F and G)

which vary in inlet nozzle configuration

header height

inlet pipe diameter and tube pass distribution. In the modeling

the possibility of deposition in the header was evaluated by accumulated mass of particles; we used the velocity contour of supercritical water (SCW) to evaluate the uniformity of the velocity distribution among the tube passes. Simulation results indicated that the optimum heat exchanger had structure F

which had a rectangular configuration of tube pass distractions

a bottom inlet

a 200-mm header height and a 10-mm inlet pipe diameter.

关键词

Keywords

references

浏览量

299

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Improving supercritical water gasification of sludge by oil palm empty fruit bunch addition: Promotion of syngas production and heavy metal stabilization

CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations

Energetic analysis of gasification of biomass by partial oxidation in supercritical water

Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis

Unraveling the methane decomposition mechanism on Fe-Ni-Ca-O composite catalysts: A combined density functional theory and microdynamic study