Numerical and experimental investigations of liquid mixing in two-stage micro-impinging stream reactors
Fluid Dynamics and Transport Phenomena|Updated:2026-01-06
|
Numerical and experimental investigations of liquid mixing in two-stage micro-impinging stream reactors
Numerical and experimental investigations of liquid mixing in two-stage micro-impinging stream reactors
中国化学工程学报(英文版)2017年25卷第4期 页码:391-400
Affiliations:
1. State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology,Beijing,China,100029
2. Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology,Beijing,China,100029
Tianyu Guo, Bin Ruan, Zhiwei Liu, 等. Numerical and experimental investigations of liquid mixing in two-stage micro-impinging stream reactors[J]. 中国化学工程学报(英文版), 2017,25(4):391-400.
Tianyu Guo, Bin Ruan, Zhiwei Liu, Muhammad Ali Jamal, Lixiong Wen, Jianfeng Chen. Numerical and experimental investigations of liquid mixing in two-stage micro-impinging stream reactors[J]. , 2017, 25(4): 391-400.
Tianyu Guo, Bin Ruan, Zhiwei Liu, 等. Numerical and experimental investigations of liquid mixing in two-stage micro-impinging stream reactors[J]. 中国化学工程学报(英文版), 2017,25(4):391-400.DOI: 10.1016/j.cjche.2016.11.015.
Tianyu Guo, Bin Ruan, Zhiwei Liu, Muhammad Ali Jamal, Lixiong Wen, Jianfeng Chen. Numerical and experimental investigations of liquid mixing in two-stage micro-impinging stream reactors[J]. , 2017, 25(4): 391-400.DOI: 10.1016/j.cjche.2016.11.015.
Numerical and experimental investigations of liquid mixing in two-stage micro-impinging stream reactors
摘要
Abstract
A two-stage micro-impinging stream reactor (TS-MISR) that combined a first pre-mixing stage with a second micro-impinging stream reacting stage for continuous multi-component reacting systems has been built from commercial T-junctions and steel micro-capillaries.Both of operating parameters and reactor configurations
such as jet Reynolds number (
Re
j
)
volumetric flow ratio (
R
)
the first-stage junction angle (
φ
)
the connecting capillary length (
L
c
) and connecting capillary diameter (
d
c
)
had significant effects on the micromixing efficiency of the reactor.Such effects were investigated for both of the two stage structures
respectively
by experimental and CFD methods and were optimized for the best micromixing performance.Intensified micromixing among at least three reacting components can be achieved in a continuous mode by using TS-MISR;therefore
it is expected that the TS-MISR will produce products of higher quality with more uniform and stable element distribution.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.