Synthesis of a novel functional group-bridged magnetized bentonite adsorbent: Characterization, kinetics, isotherm, thermodynamics and regeneration
Separation Science and Engineering|Updated:2026-01-06
|
Synthesis of a novel functional group-bridged magnetized bentonite adsorbent: Characterization, kinetics, isotherm, thermodynamics and regeneration
Synthesis of a novel functional group-bridged magnetized bentonite adsorbent: Characterization, kinetics, isotherm, thermodynamics and regeneration
中国化学工程学报(英文版)2017年25卷第5期 页码:587-594
Affiliations:
1. College of Materials Science and Engineering, Nanjing Forestry University,Nanjing,China,210037
2. College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics,Nanjing,China,210016
3. State Key Laboratory of Bioelectronics, Jiangsu Key Laboratory for Biomaterials and Devices, School of Biological Science and Medical Engineering, Southeast University,Nanjing,China,210096
zeta potential analysis and Brunner-Emmet-Teller (BET). The APTES-Fe
3
O
4
/bentonite was assessed as adsorbents for methylene blue (MB) with a high adsorption capacity (91.83 mg·g
-1
). Factors affecting the adsorption of MB (such as pH
equilibrium time
temperature and initial concentration) were investigated. The adsorption process completely reaches equilibrium after 120 min and the maximum sorption is achieved at pH 8.0. The adsorption trend follows the pseudosecond order kinetics model. The adsorption data gives good fits with Langmuir isotherm model. The parameter factor
R
L
falls between 0 and 1
indicating the adsorption of MB is favorable. The adsorption process is endot
hermic with positive Δ
H
0
values. The positive values of Δ
G
0
confirm the affinity of the adsorbent towards MB
and suggest an increased randomness at the solid-liquid interface during the adsorption process. Regeneration of the saturated adsorbent was easily carried out via gamma-irradiation.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Fabricating amide functional group modified hyper-cross-linked adsorption resin with enhanced adsorption and recognition performance for 5-hydroxymethylfurfural adsorption via simple one-step
Studies on batch adsorptive removal of cadmium and nickel from synthetic waste water using silty clay originated from Balochistan- Pakistan
Adsorption Behavior of Rhodamine B on UiO-66
Adsorptive Thermodynamic Properties and Kinetics of trans-1,2-Cyclohexandiol onto AB-8 Resin
Synthesis of zinc oxide nanoparticles reinforced clay and their applications for removal of Pb (II) ions from aqueous media
相关作者
Lei Hu
Shunhui Tao
Junting Xian
Xiaodong Zhang
Yao Liu
Xiaojie Zheng
Xiaoqing Lin
Abdul Samad
相关机构
School of Chemical Engineering and Light Industry, Guangdong University of Technology
Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, Guangdong University of Technology
Guangzhou Key Laboratory of Clean Transportation Energy Chemistry, Guangdong University of Technology