Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater

P. Asaithambi; Baharak Sajjadi; Abdul Raman Abdul Aziz

doi:10.1016/j.cjche.2016.10.005

Your Location：

Home >

Browse articles >

Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater

Energy, Resources and Environmental Technol | Updated：2026-01-06

- Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater
- Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater
- 中国化学工程学报（英文版） 2017年25卷第4期页码：516-522
- Affiliations：
  
  Department of Chemical Engineering, Faculty of Engineering, University of Malaya,Malaysia,50603
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2016.10.005
  中图分类号：
- 纸质出版：2017
- Accepted：
Scan QR Code
P. Asaithambi, Baharak Sajjadi, Abdul Raman Abdul Aziz. Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater[J]. 中国化学工程学报（英文版）, 2017,25(4):516-522.

P. Asaithambi, Baharak Sajjadi, Abdul Raman Abdul Aziz. Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater[J]. , 2017, 25(4): 516-522.
P. Asaithambi, Baharak Sajjadi, Abdul Raman Abdul Aziz. Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater[J]. 中国化学工程学报（英文版）, 2017,25(4):516-522. DOI： 10.1016/j.cjche.2016.10.005.

P. Asaithambi, Baharak Sajjadi, Abdul Raman Abdul Aziz. Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater[J]. , 2017, 25(4): 516-522. DOI： 10.1016/j.cjche.2016.10.005.

摘要

Abstract

The use of hybrid advanced oxidation processes (AOPs) for the removal of pollutants from industrial effluents has been extensively studied in recent literature.The aim of this study is to compare the performance of the photo

Fenton

photo-Fenton and ozone-photo-Fenton processes in terms of color removal and chemical oxygen demand (COD) removal of distillery industrial effluent together with the associated electrical energy per order.It was observed from the experimental results that the O

/UV/Fe

process yielded a 100% color and 95.50% COD removals with electrical energy per order of 0.015 kW·h·m

-3

compared to all other combinations of the AOPs.The effects of various operating parameters such as H

and Fe

concentration

effluent pH

COD concentration and UV power on the removal of color

COD and electrical energy per order for the ozone-photo-Fenton process was critically studied and reported.The color and COD removals were analyzed using a UV/Vis spectrometer and closed reflux method.

关键词

Keywords

references

浏览量

234

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

COS generation behavior during desulfurization for H2S over zeolite in simulated blast furnace gas

Understanding temperature-dependent degradation in proton exchange membrane water electrolyzer: The critical role of porous transport layer

Dual-site engineering of Ga-modified HZSM-5 towards efficient propane aromatization

Revealing critical factors in lignite-water interactions: From atomic to macroscopic

Mechanochemical preparation and properties of B-N doped carbon materials based on calcium carbide