Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation

Chunli Li; Yuanyuan Song; Jing Fang; Yang Liu; Weiyi Su; Yuqi Hu

doi:10.1016/j.cjche.2016.08.011

Your Location：

Home >

Browse articles >

Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation

Separation Science and Engineering | Updated：2026-01-06

- Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation
- Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation
- 中国化学工程学报（英文版） 2017年25卷第3期页码：274-277
- Affiliations：
  
  School of Chemical Engineering and Technology, Hebei University of Technology,Tianjin,China,300130
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2016.08.011
  中图分类号：
- 纸质出版：2017
- Accepted：
Scan QR Code
Chunli Li, Yuanyuan Song, Jing Fang, 等. Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation[J]. 中国化学工程学报（英文版）, 2017,25(3):274-277.

Chunli Li, Yuanyuan Song, Jing Fang, Yang Liu, Weiyi Su, Yuqi Hu. Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation[J]. , 2017, 25(3): 274-277.
Chunli Li, Yuanyuan Song, Jing Fang, 等. Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation[J]. 中国化学工程学报（英文版）, 2017,25(3):274-277. DOI： 10.1016/j.cjche.2016.08.011.

Chunli Li, Yuanyuan Song, Jing Fang, Yang Liu, Weiyi Su, Yuqi Hu. Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation[J]. , 2017, 25(3): 274-277. DOI： 10.1016/j.cjche.2016.08.011.

摘要

Abstract

The separation of ternary mixture of butanol

butyl acetate

andmethyl isobutyl ketone (MIBK)was initially analyzed by the residual curve. In this process

MIBK was chosen as the azeotropic agent during the first step of separation. The optimum mass ratio of extra MIBK was 1.6 in the modified feed stream according to the residual curve. Thus on this condition the top product was butanol-MIBK azeotrope while the bottom product was butyl acetate in the preliminary separation of the mixture. Then the butanol and MIBK azeotrope was separated by the double effect pressures wing distillation with the low pressure column performing at 30 kPa and the atmospheric pressure column at 101 kPa. The optimal operating conditions were then obtained by using Aspen Plus to simulate and optimize the process. The results showed that the mass purities of butanol

butyl acetate

and MIBK were all more than 99% and reached the design requirements. Additionally

compared with the traditional distillation with outside heating

the double effect pressure swing distillation saved the reboiler duty by 48.6% and the condenser duty by 44.6%.

关键词

Keywords

references

浏览量

190

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Safety evaluation of rectisol process based on quantitative hazard and operability analysis

Dynamic control analysis of interconnected pressure-swing distillation process with and without heat integration for separating azeotrope

Investigation of the liquid recycle in the reactor cascade of an industrial scale ebullated bed hydrocracking unit

Process optimization of an industrial acetic acid dehydration progress via heterogeneous azeotropic distillation

Comparison of continuous homogenous azeotropic and pressure-swing distillation for a minimum azeotropic system ethyl acetate/n-hexane separation