CFD-based optimization and design of multi-channel inorganic membrane tubes

Zhao Yang; Jingcai Cheng; Chao Yang; Bin Liang

doi:10.1016/j.cjche.2016.05.044

Your Location：

Home >

Browse articles >

CFD-based optimization and design of multi-channel inorganic membrane tubes

Separation Science and Engineering | Updated：2026-01-06

- CFD-based optimization and design of multi-channel inorganic membrane tubes
- CFD-based optimization and design of multi-channel inorganic membrane tubes
- 中国化学工程学报（英文版） 2016年24卷第10期页码：1375-1385
- Affiliations：
  
  1. College of Chemical Engineering, Sichuan University,Chengdu,China,610065
  2. Key Laboratory of Green Process and Engineering, Institute of Process Engineering, CAS,Beijing,China,100190
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2016.05.044
  中图分类号：
- 纸质出版：2016
- Accepted：
Scan QR Code
Zhao Yang, Jingcai Cheng, Chao Yang, 等. CFD-based optimization and design of multi-channel inorganic membrane tubes[J]. 中国化学工程学报（英文版）, 2016,24(10):1375-1385.

Zhao Yang, Jingcai Cheng, Chao Yang, Bin Liang. CFD-based optimization and design of multi-channel inorganic membrane tubes[J]. , 2016, 24(10): 1375-1385.
Zhao Yang, Jingcai Cheng, Chao Yang, 等. CFD-based optimization and design of multi-channel inorganic membrane tubes[J]. 中国化学工程学报（英文版）, 2016,24(10):1375-1385. DOI： 10.1016/j.cjche.2016.05.044.

Zhao Yang, Jingcai Cheng, Chao Yang, Bin Liang. CFD-based optimization and design of multi-channel inorganic membrane tubes[J]. , 2016, 24(10): 1375-1385. DOI： 10.1016/j.cjche.2016.05.044.

摘要

Abstract

As amajor configuration of membrane elements

multi-channel porous inorganicmembrane tubeswere studied by means of theoretical analysis and simulation. Configuration optimization of a cylindrical 37-channel porous inorganic membrane tube was studied by increasing membrane filtration area and increasing permeation efficiency of inner channels. An optimal ratio of the channel diameter to the inter-channel distance was proposed so as to increase the total membrane filtration area of themembrane tube. The three-dimensional computational fluid dynamics (CFD) simulationwas conducted to study the cross-flow permeation flow of purewater in the 37-channel ceramic membrane tube. A model combining Navier-Stokes equation with Darcy's law and the porous jump boundary conditions was applied. The relationship between permeation efficiency and channel locations

and the method for increasing the permeation efficiency of inner channels were proposed. Some novel multichannel membrane configurations with more permeate side channels were put forward and evaluated.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis

Reaction network design and hybrid modeling of S Zorb

Modeling of propane dehydrogenation combined with chemical looping combustion of hydrogen in a fixed bed reactor

Optimization of circulating cooling water systems based on chance constrained programming

Recent progress on equation-oriented optimization of complex chemical processes