Improvement of CO<sub>2</sub> capture performance of calcium-based absorbent modified with palygorskite

Liyuan Shan; Hui Li; Binglu Meng; Youhai Yu; Yonggang Min

doi:10.1016/j.cjche.2016.05.021

Your Location：

Home >

Browse articles >

Improvement of CO₂ capture performance of calcium-based absorbent modified with palygorskite

Energy, Resources and Environmental Technology | Updated：2026-01-06

- Improvement of CO₂ capture performance of calcium-based absorbent modified with palygorskite
- Improvement of CO₂ capture performance of calcium-based absorbent modified with palygorskite
- 中国化学工程学报（英文版） 2016年24卷第9期页码：1283-1289
- Affiliations：
  
  1. College of Material and Mineral Resource, Xi'an University of Architecture and Technology,Xi'an,China,710055
  2. Shaanxi Techno-Institute of Recycling Economy,Xi'an,China,710055
  3. Xi'an Institute of Optics and Precision Mechanics of Chinese Academy of Science,Xi'an,China,710119
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2016.05.021
  中图分类号： 10.1016/j.cjche.2016.05.021
- 纸质出版：2016
- Accepted：
Scan QR Code
Liyuan Shan, Hui Li, Binglu Meng, 等. Improvement of CO₂ capture performance of calcium-based absorbent modified with palygorskite[J]. 中国化学工程学报（英文版）, 2016,24(9):1283-1289. DOI: 10.1016/j.cjche.2016.05.021.

capture performance of calcium-based absorbent modified with palygorskite[J]. , 2016, 24(9): 1283-1289.
Liyuan Shan, Hui Li, Binglu Meng, 等. Improvement of CO₂ capture performance of calcium-based absorbent modified with palygorskite[J]. 中国化学工程学报（英文版）, 2016,24(9):1283-1289. DOI: 10.1016/j.cjche.2016.05.021. DOI：

capture performance of calcium-based absorbent modified with palygorskite[J]. , 2016, 24(9): 1283-1289. DOI： 10.1016/j.cjche.2016.05.021.

摘要

中图分类号:

Abstract

Limestone can be used for CO

capture and sequestration (CCS) in flue gas effectively. However

its CCS capability will dramatically decline after several cycles due to the surface "sintering". In this work

the limestone was modified with palygorskite to reduce sintering phenomenon between the absorbent particles during the CCS process and the carbonation rate of the limestone can be enhanced effectively. Palygorskite is a natural mineral with nano-fibrous structure which can reduce the mutual contact of limestone particles during the CCS process. The results were detected by TGA

SEM

MIP

FTIR and particle size analyzer respectively. The best CO

capture performance of modified absorbent was 13.11% improvement with only 5 wt% palygorskite added during the CCS process after 15 cycles compared with natural absorbent. It was found that excellent microscopic structures of absorbent modified with palygorskite was created

and the surface sintering was postponed leading to CO

capture performance enhanced under the s

ame conditions.

关键词

Keywords

references

浏览量

193

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Size-dependent decomposition behavior of limestone in fluidized bed calcination: Insights into fluidization, kinetics, and mechanisms

Preparation and performance analysis of non-aqueous absorbents based on alcohol ether organic compounds for CO2 capture

Hydrogen production from biomass waste gasification under the enhancement of catalyst-sorbent hybrid functional material synthesized from steel slag

The template-free synthesis of zeolite NaY for CO2 capture

Regulation of interlayer channels of graphene oxide nanosheets in ultra-thin Pebax mixed-matrix membranes for CO2 capture

Improvement of CO2 capture performance of calcium-based absorbent modified with palygorskite

Improvement of CO2 capture performance of calcium-based absorbent modified with palygorskite

DOI：10.1016/j.cjche.2016.05.021

摘要

Abstract

关键词

Keywords

references

Improvement of CO₂ capture performance of calcium-based absorbent modified with palygorskite

Improvement of CO₂ capture performance of calcium-based absorbent modified with palygorskite