Supported by the National Natural Science Foundation of China (21566015, 51404123), the Applied Basic Research Projects of Yunnan (2013FC002, 2013FC003, 2015FB126) and the Provincial Personnel Training Funds of Yunnan Province of China (KKSY201352109, KKPT201563013).
Yadong Li, Gang Xie, Ting Lei, 等. A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process[J]. 中国化学工程学报(英文版), 2016,(6):749-756.
Yadong Li, Gang Xie, Ting Lei, et al. A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process[J]. Chinese Journal of Chemical Engineering, 2016, (6): 749-756.
Yadong Li, Gang Xie, Ting Lei, 等. A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process[J]. 中国化学工程学报(英文版), 2016,(6):749-756.DOI: 10.1016/j.cjche.2016.04.051.
Yadong Li, Gang Xie, Ting Lei, et al. A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process[J]. Chinese Journal of Chemical Engineering, 2016, (6): 749-756.DOI: 10.1016/j.cjche.2016.04.051.
A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process
摘要
Abstract
The fluid dynamic behavior of feeding gas (TiCl
4
) in an annular channel affects the combination of O
2
and TiCl
4
in an oxidation reactor
a key piece of equipment in titanium pigment production. The numerical procedure was validated by a 3-dimensional gas flow in the annular channel. Applying the validated model
the flow characteristics of TiCl
4
in the oxidation reactor with a tangential inlet were simulated and characterized. The flow distribution with five rectifying rings of different structure was simulated and analyzed. The results showed that the rectifying ring improved the distribution uniformity of the pressure and outlet velocity. Compared to the original case without a rectifying ring
the non-uniformity of the pressure and outlet velocity could be reduced by up to 91% and 69% respectively. The rectifying ring #5
which can be installed and adjusted easily
ismore effective in realizing even distribution. In addition
installation of the rectifying ring effectively reduced the circulating flow in an annular channel as well as the total energy loss.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.