CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations

Xinyu Yu; Tianwen Chen; Qi Zhang; Tiefeng Wang

doi:10.1016/j.cjche.2016.04.039

Your Location：

Home >

Browse articles >

CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations

Fluid Dynamics and Transport Phenomena | Updated：2026-01-06

- CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations
- CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations
- 中国化学工程学报（英文版） 2018年26卷第5期页码：903-913
- Affiliations：
  
  Beijing Key Laboratory of Green Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University,Beijing,China,100084
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2016.04.039
  中图分类号：
- 纸质出版：2018
- Accepted：
Scan QR Code
Xinyu Yu, Tianwen Chen, Qi Zhang, 等. CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations[J]. 中国化学工程学报（英文版）, 2018,26(5):903-913.

Xinyu Yu, Tianwen Chen, Qi Zhang, Tiefeng Wang. CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations[J]. Chin.J.Chem.Eng., 2018, 26(5): 903-913.
Xinyu Yu, Tianwen Chen, Qi Zhang, 等. CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations[J]. 中国化学工程学报（英文版）, 2018,26(5):903-913. DOI： 10.1016/j.cjche.2016.04.039.

Xinyu Yu, Tianwen Chen, Qi Zhang, Tiefeng Wang. CFD simulations of quenching process for partial oxidation of methane: Comparison of jet-in-cross-flow and impinging flow configurations[J]. Chin.J.Chem.Eng., 2018, 26(5): 903-913. DOI： 10.1016/j.cjche.2016.04.039.

摘要

Abstract

A new quenching process using the cold pyrolysis gas has been proposed for the partial oxidation (POX) of methane to recover the heat. The mixing of hot product gas and cold pyrolysis gas in milliseconds is critical to this new approach. Two most widely-used rapid mixing configurations

i.e. the jet-in-cross-flow (JICF) and impinging flow configurations

are compared in terms of mixing and quenching performances using computational fluid dynamics (CFD) coupled with detailed reaction mechanism Leeds 1.5. The mixedness

residence time distribution

temperature decreasing rate and loss ratio of acetylene during the quenching are systematically studied. The results show that the impinging flow has a more uniform mixing and narrower residence time distribution than the JICF. However

the temperature decreasing rate of the mainstream is faster in the JICF than in the impinging flow. The loss ratio of acetylene in the quenching process is 2.89% for the JICF and 1.45% for the impinging flow

showing that the impinging flow configuration is better and feasible for the quenching of POX of methane.

关键词

Keywords

references

浏览量

289

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Impingement and mixing dynamics of micro-droplets on a solid surface

Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations

Research on the electrostatic spray characteristics of ethanol/n-butanol blended fuels

Understanding temperature-dependent degradation in proton exchange membrane water electrolyzer: The critical role of porous transport layer

Synergistic Ba/Na promotion of BaFe2O4-derived catalysts for enhanced CO2 hydrogenation to light olefins