Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH<sub>3</sub>: Process optimization by Taguchi method

Parvaneh Nakhostin Panahi; Darush Salari; Aligholi Niaei; Seyed Mahdi Mousavi

doi:10.1016/j.cjche.2015.08.003

Your Location：

Home >

Browse articles >

Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH₃: Process optimization by Taguchi method

催化、动力学与反应工程 | Updated：2026-01-06

- Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH₃: Process optimization by Taguchi method
- Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH₃: Process optimization by Taguchi method
- 中国化学工程学报（英文版） 2015年23卷第10期页码：1647-1654
- Affiliations：
  
  1. 2 Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz,Iran
  2. 3 Department of Chemical Engineering & Petroleum, University of Tabriz, Tabriz,Iran
  3. 4 Faculty of Chemistry, University of Kashan, Kashan,Iran
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2015.08.003
  中图分类号：
- 纸质出版：2015
- Accepted：
Scan QR Code
Parvaneh Nakhostin Panahi, Darush Salari, Aligholi Niaei, 等. Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH₃: Process optimization by Taguchi method[J]. 中国化学工程学报（英文版）, 2015,23(10):1647-1654. DOI: 10.1016/j.cjche.2015.08.003.

: Process optimization by Taguchi method[J]. Chinese Journal of Chemical Engineering, 2015, 23(10): 1647-1654.
Parvaneh Nakhostin Panahi, Darush Salari, Aligholi Niaei, 等. Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH₃: Process optimization by Taguchi method[J]. 中国化学工程学报（英文版）, 2015,23(10):1647-1654. DOI: 10.1016/j.cjche.2015.08.003. DOI：

: Process optimization by Taguchi method[J]. Chinese Journal of Chemical Engineering, 2015, 23(10): 1647-1654. DOI： 10.1016/j.cjche.2015.08.003.

摘要

Abstract

A series of different transition metals (V

Cu and Zn) promoted H-ZSM-5 catalysts were prepared by impregnation method and characterized by X-ray diffraction (XRD)

scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The catalytic activity of these catalysts was evaluated for the selective catalytic reduction (SCR) of NO with NH

as reductant in the presence of oxygen. The results revealed that the catalytic activity of Cu-ZSM-5 nanocatalyst for NO conversion to N

was 80% at 300 ℃

which was the best among various promoted metals. Design of experiments (DOEs) with Taguchi method was employed to optimize NH

-SCR process parameters such as NH

/NO ratio

concentration

and gas hourly space velocity (GHSV) over Cu-ZSM-5 nanocatalyst at 250 and 300 ℃. Results showed that the most important parameter in NH

-SCR of NO is O

concentration; followed by NH

/NO ratio and GHSV has little importance. The NO conversion to N

of 63.1% and 94.86%was observed at 250 ℃ and 300 ℃

respectively under the obtained optimum conditions.

关键词

Keywords

references

浏览量

201

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Preparation and extrusion of ZSM-5 based on biomass templates for enhanced mechanical properties and catalytic pyrolysis performance

Effect of samarium doping on the activity and sulfur resistance of Ce/MnFeOx catalyst for low-temperature selective catalytic reduction of NOx by ammonia

Green synthesis of ZSM-5 using silica fume and catalytic co-cracking of lignin and plastics for production of monocyclic aromatics

Boosting low-temperature selective catalytic reduction of NO with NH3 of V2O5/TiO2 catalyst via B-doping

Insight into SO2 poisoning and regeneration of one-pot synthesized Cu-SSZ-13 catalyst for selective reduction of NOx by NH3

Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH3: Process optimization by Taguchi method

Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH3: Process optimization by Taguchi method

DOI：10.1016/j.cjche.2015.08.003

摘要

Abstract

关键词

Keywords

references

Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH₃: Process optimization by Taguchi method

Study of M-ZSM-5 nanocatalysts (M: Cu, Mn, Fe, Co …) for selective catalytic reduction of NO with NH₃: Process optimization by Taguchi method