A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation

Wenbin Li; Kuotsung Yu; Xigang Yuan; Botan Liu

doi:10.1016/j.cjche.2015.01.011

Your Location：

Home >

Browse articles >

A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation

流体力学与传递现象 | Updated：2026-01-06

- A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation
- A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation
- 中国化学工程学报（英文版） 2015年23卷第7期页码：1085-1094
- Affiliations：
  
  2 State Key Laboratory for Chemical Engineering and School of Chemical Engineering and Technology, Tianjin University,Tianjin,China,300072
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2015.01.011
  中图分类号：
- 纸质出版：2015
- Accepted：
Scan QR Code
Wenbin Li, Kuotsung Yu, Xigang Yuan, 等. A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation[J]. 中国化学工程学报（英文版）, 2015,23(7):1085-1094.

Wenbin Li, Kuotsung Yu, Xigang Yuan, Botan Liu. A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation[J]. Chin.J.Chem.Eng., 2015, 23(7): 1085-1094.
Wenbin Li, Kuotsung Yu, Xigang Yuan, 等. A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation[J]. 中国化学工程学报（英文版）, 2015,23(7):1085-1094. DOI： 10.1016/j.cjche.2015.01.011.

Wenbin Li, Kuotsung Yu, Xigang Yuan, Botan Liu. A Reynolds mass flux model for gas separation process simulation: I. Modeling and validation[J]. Chin.J.Chem.Eng., 2015, 23(7): 1085-1094. DOI： 10.1016/j.cjche.2015.01.011.

摘要

Abstract

Separation process undertaken in packed columns often displays anisotropic turbulentmass diffusion. The anisotropic turbulent mass diffusion can be characterized rigorously by using the Reynolds mass flux (RMF) model. With the RMF model

the concentration and temperature as well as the velocity distributions can be simulated numerically. Themodeled Reynolds mass flux equation is adopted to close the turbulent mass transfer equation

while themodeled Reynolds heat flux and Reynolds stress equations are used to close the turbulent heat and momentum transfer equations

so that the Boussinesq postulate and the isotropic assumption are abandoned. To validate the presented RMF model

simulation is carried out for CO

absorption into aqueous NaOH solutions in a packed column (0.1 m id

packed with 12.7 mm Berl saddles up to a height of 6.55 m). The simulated results are comparedwith the experimental data and satisfactory agreement is found both in concentration and temperature distributions. The sequel Part II extends the model application to the simulation of an unsteady state adsorption process in a packed column.

关键词

Keywords

references

浏览量

237

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Cascade equilibrium stage relaxation method by introducing equilibrium efficiency parameter

A CFD model for predicting the heat transfer in the industrial scale packed bed

Mass transfer performance of structured packings in a CO2 absorption tower

A Reynolds mass flux model for gas separation process simulation: II. Application to adsorption on activated carbon in a packed column

Experimental and numerical studies of holdup and velocity behavior for inclined bubbly oil-water pipe flows