3D numerical study on flow structure and heat transfer in a circular tube with V-baffles

Withada Jedsadaratanachai; Nuthvipa Jayranaiwachira; Pongjet Promvonge

doi:10.1016/j.cjche.2014.11.006

Your Location：

Home >

Browse articles >

3D numerical study on flow structure and heat transfer in a circular tube with V-baffles

流体力学与传递现象 | Updated：2026-01-06

- 3D numerical study on flow structure and heat transfer in a circular tube with V-baffles
- 3D numerical study on flow structure and heat transfer in a circular tube with V-baffles
- 中国化学工程学报（英文版） 2015年23卷第2期页码：342-349
- Affiliations：
  
  Department of Mechanical Engineering, Faculty of Engineering, King Mongkut's Institute of Technology Ladkrabang,Bangkok,Thailand,10520
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2014.11.006
  中图分类号：
- 纸质出版：2015
- Accepted：
Scan QR Code
Withada Jedsadaratanachai, Nuthvipa Jayranaiwachira, Pongjet Promvonge. 3D numerical study on flow structure and heat transfer in a circular tube with V-baffles[J]. 中国化学工程学报（英文版）, 2015,23(2):342-349.

Withada Jedsadaratanachai, Nuthvipa Jayranaiwachira, Pongjet Promvonge. 3D numerical study on flow structure and heat transfer in a circular tube with V-baffles[J]. , 2015, 23(2): 342-349.
Withada Jedsadaratanachai, Nuthvipa Jayranaiwachira, Pongjet Promvonge. 3D numerical study on flow structure and heat transfer in a circular tube with V-baffles[J]. 中国化学工程学报（英文版）, 2015,23(2):342-349. DOI： 10.1016/j.cjche.2014.11.006.

Withada Jedsadaratanachai, Nuthvipa Jayranaiwachira, Pongjet Promvonge. 3D numerical study on flow structure and heat transfer in a circular tube with V-baffles[J]. , 2015, 23(2): 342-349. DOI： 10.1016/j.cjche.2014.11.006.

摘要

Abstract

A 3D numerical investigation has been carried out to examine periodic laminar flow and heat transfer characteristics in a circular tubewith 45° V-baffleswith isothermalwall. The computations are based on the finite volume method (FVM)

and the SIMPLE algorithmhas been implemented. The fluid flowand heat transfer characteristics are presented for Reynolds numbers ranging from 100 to 2000. To generate main longitudinal vortex flows through the tested section

V-baffleswith an attack angle of 45° aremounted in tandem and in-line arrangement on the opposite positions of the circular tube. Effects of tube blockage ratio

flow direction on heat transfer and pressure drop in the tube are studied. It is apparent that a pair of longitudinal twisted vortices (P-vortex) created by a V-baffle can induce impingement on awall of the inter-baffle cavity and lead a drastic increase in heat transfer rate at tube wall. In addition

the larger blockage ratio results in the higher Nusselt number and friction factor values. The computational results show that the optimum thermal enhancement factor is around 3.20 at baffle height of

=0.20 and

=0.25 times of the tube diameter for the V-upstreamand V-downstream

respectively.

关键词

Keywords

references

浏览量

181

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Comparative study of heat transfer and pressure drop for curved-twisted tubes utilized in chemical engineering

Inhibition research of double protection on flame propagations of hydrogen doped methane explosions

Research on the prediction model of effective thermal conductivity of marine natural gas hydrate reservoirs based on machine learning

Multiphysics coupling rule of semi-coke catalytic tar cracking

Laminar flow of high-viscous non-Newtonian power-law and Bingham fluids in multiple structural bifurcation channel distributors: Flow patterns and pressure drop correlation