Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts

Watcharin Noothong; Supattarachai Suwannapan; Chinaruk Thianpong; Pongjet Promvonge

doi:10.1016/j.cjche.2014.05.018

Your Location：

Home >

Browse articles >

Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts

流体力学与传递现象 | Updated：2026-01-06

- Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts
- Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts
- 中国化学工程学报（英文版） 2015年23卷第3期页码：490-498
- Affiliations：
  
  Department of Mechanical Engineering, Faculty of Engineering, King Mongkut's Institute of Technology Ladkrabang,Bangkok,Thailand,10520
- Author bio：
- Funds：
- DOI：10.1016/j.cjche.2014.05.018
  中图分类号：
- 纸质出版：2015
- Accepted：
Scan QR Code
Watcharin Noothong, Supattarachai Suwannapan, Chinaruk Thianpong, 等. Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts[J]. 中国化学工程学报（英文版）, 2015,23(3):490-498.

Watcharin Noothong, Supattarachai Suwannapan, Chinaruk Thianpong, Pongjet Promvonge. Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts[J]. , 2015, 23(3): 490-498.
Watcharin Noothong, Supattarachai Suwannapan, Chinaruk Thianpong, 等. Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts[J]. 中国化学工程学报（英文版）, 2015,23(3):490-498. DOI： 10.1016/j.cjche.2014.05.018.

Watcharin Noothong, Supattarachai Suwannapan, Chinaruk Thianpong, Pongjet Promvonge. Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts[J]. , 2015, 23(3): 490-498. DOI： 10.1016/j.cjche.2014.05.018.

摘要

Abstract

The article presents an experimental and numerical study on thermal performance enhancement in a constant heatfluxed square-duct inserted diagonallywith 45°discrete V-finned tapes (DFT). The experimentswere carried out by varying the airflow rate through the tested square duct with DFT inserts for Reynolds number from 4000 to 25000. The effect of the DFT with V-tip pointing upstream at various relative fin heights and pitches on heat transfer and pressure drop characteristics was experimentally investigated. Both the heat transfer and pressure drop were presented in terms of Nusselt number and friction factor respectively. Several V-finned tape characteristics were introduced such as fin-to duct-height ratio or blockage ratio (

e/H

=0.075

0.1

0.15 and 0.2)

fin pitch to duct height ratio (

P/H

=0.5

1.0

1.5 and 2.0) and fin attack angle

α=45°. The experimental results reveal that the heat transfer and friction factor values with DFT inserts increase with the increment of

but the decrease of RP. The inserted square-duct at

=0.2 and

=0.5 provides the highest heat transfer and friction factor while the one with

=0.1

and

=1.5 yields the highest thermal performance. Also

a numerical simulation was conducted to investigate the flow structure and heat transfer mechanism inside the tested duct with DFT inserts.

关键词

Keywords

references

浏览量

357

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger

Thermal performance assessment of self-rotating twisted tapes and Al2O3 nanoparticle in a circular pipe

A comprehensive study of two-phase flow and heat transfer of water/Ag nanofluid in an elliptical curved minichannel

Enhanced heat transfer in rectangular duct with punched winglets

Devise of a W serpentine shape tube heat exchanger in a hard chromium electroplating process