High-Thermal Conductive Coating Used on Metal Heat Exchanger

李静; 梁剧; 刘业明

doi:10.1016/S1004-9541(14)60068-9

Your Location：

Home >

Browse articles >

High-Thermal Conductive Coating Used on Metal Heat Exchanger

催化、动力学与反应工程 | Updated：2026-01-06

- High-Thermal Conductive Coating Used on Metal Heat Exchanger
- High-Thermal Conductive Coating Used on Metal Heat Exchanger
- 中国化学工程学报（英文版） 2014年第5期页码：596-6011004-954160068-9
- Affiliations：
  
  School of Chemistry and Chemical Engineering, South China University of Technology,Guangzhou,China,510640
- Author bio：
- Funds：
  
  Supported by the State Key Development of Basic Research of China (2001CB710703), the National Natural Science Foundation of China (51176053), the Key Technologies R&D Program of Guangdong Province (2011B090400562), the Strategic Emerging Industry Special Funds of Guangdong Province (2012A080304015), and the Key Technologies R&D Program of Guangzhou City (2010U1-D00221, 2011Y5000006).
- DOI：10.1016/S1004-9541(14)60068-9
  中图分类号：
- 纸质出版：2014
- Accepted：
Scan QR Code
李静, 梁剧, 刘业明. High-Thermal Conductive Coating Used on Metal Heat Exchanger[J]. 中国化学工程学报（英文版）, 2014,(5):596-6011004-954160068-9.

LI Jing, LIANG Ju, LIU Yeming. High-Thermal Conductive Coating Used on Metal Heat Exchanger[J]. Chinese Journal of Chemical Engineering, 2014, (5): 596-6011004-954160068-9.
李静, 梁剧, 刘业明. High-Thermal Conductive Coating Used on Metal Heat Exchanger[J]. 中国化学工程学报（英文版）, 2014,(5):596-6011004-954160068-9. DOI： 10.1016/S1004-9541(14)60068-9.

LI Jing, LIANG Ju, LIU Yeming. High-Thermal Conductive Coating Used on Metal Heat Exchanger[J]. Chinese Journal of Chemical Engineering, 2014, (5): 596-6011004-954160068-9. DOI： 10.1016/S1004-9541(14)60068-9.

摘要

Abstract

Based on modified silicon polyester resin in addition to several functional fillers such as corrosion-resistant fillers

heat-resistant fillers and thermal conductive fillers

a high thermal conductive coating can be made. On the basis of boronnitride (BN) and aluminum nitride (AIN) used as thermal conductive fillers and by means of the testing system of hot disk and heat transfer experiment

researches on the varieties of thermal conductive fillers and the effects of the contents of high-thermal conductive coating have been done

which shows that the thermal conductivity of coating increases with the increase of the quality fraction and the coefficient of thermal conductivity of the thermal conductive fillers of coating. With guaranteeing better heat resistance

stronger corrosion resistance and adhesive force

the coefficient of coating can reach a level as high as 3 W·m

-1

·K

-1

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Boron-modified ZSM-5 coated on honeycomb monolith surface for selective production of propylene from methanol

Layer-by-layer fabrication of montmorillonite coating immobilizing Cu2O nanoparticles for continuously catalyzing glycerol to dihydroxyacetone

Boron nitride silicone rubber composite foam with low dielectric and high thermal conductivity

Thermal conductivity of hydrate and effective thermal conductivity of hydrate-bearing sediment

The establishment of Boron nitride@sodium alginate foam/polyethyleneglycol composite phase change materials with high thermal conductivity, shape stability, and reusability