Measurement and Modeling for the Solubility of Hydrogen Sulfide in Primene JM-T

李杰; 林晓; 宁朋歌; 曹宏斌; 张懿; John C. Crittenden

doi:10.1016/S1004-9541(14)60016-1

Your Location：

Home >

Browse articles >

Measurement and Modeling for the Solubility of Hydrogen Sulfide in Primene JM-T

化工热力学 | Updated：2026-01-06

- Measurement and Modeling for the Solubility of Hydrogen Sulfide in Primene JM-T
- Measurement and Modeling for the Solubility of Hydrogen Sulfide in Primene JM-T
- 中国化学工程学报（英文版） 2014年22卷第1期页码：89-971004-954160016-1
- Affiliations：
  
  1. 2 Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences,Beijing,China,100190
  2. 3 Graduate University of Chinese Academy of Sciences,Beijing,China,100049
  3. 4 Brook Byers Institute for Sustainable Systems, Georgia Institute of Technology,GA,Atlanta,USA,30332
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(14)60016-1
  中图分类号：
- 纸质出版：2014
- Accepted：
Scan QR Code
李杰, 林晓, 宁朋歌, 等. Measurement and Modeling for the Solubility of Hydrogen Sulfide in Primene JM-T[J]. 中国化学工程学报（英文版）, 2014,22(1):89-971004-954160016-1.

LI Jie, LIN Xiao, NING Pengge, CAO Hongbin, ZHANG Yi, John C. Crittenden. Measurement and Modeling for the Solubility of Hydrogen Sulfide in Primene JM-T[J]. Chin.J.Chem.Eng., 2014, 22(1): 89-97.
李杰, 林晓, 宁朋歌, 等. Measurement and Modeling for the Solubility of Hydrogen Sulfide in Primene JM-T[J]. 中国化学工程学报（英文版）, 2014,22(1):89-971004-954160016-1. DOI： 10.1016/S1004-9541(14)60016-1.

LI Jie, LIN Xiao, NING Pengge, CAO Hongbin, ZHANG Yi, John C. Crittenden. Measurement and Modeling for the Solubility of Hydrogen Sulfide in Primene JM-T[J]. Chin.J.Chem.Eng., 2014, 22(1): 89-97. DOI： 10.1016/S1004-9541(14)60016-1.

摘要

Abstract

The primary aliphatic amine Primene JM-T was investigated as a potential absorbent for H

S removal. The solubility of H

S in JM-T was measured at 298

313

333

353

and 368 K with H

S partial pressures from 20 to 760 kPa and H

S loading from 0.02 to 0.8 mol H

S per mol JM-T. Relevant physical properties

such as density

viscosity and dielectric constant

of the material were measured. The thermodynamic model with two-suffix Margules equation was used to correlate the experimental vapor-liquid equilibrium data. Furthermore

the absorption mechanism in non-aqueous system is suggested and the difference between non-aqueous and aqueous absorption system is pointed out.

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

The carbon capture performance of phase change absorbent based on nanoparticle enhancement

Microbubble-based chemical process intensification: A review

Isobaric vapor—liquid equilibrium for the binary system of methyl propionate and methyl methacrylate at 90.0, 75.0, 60.0, 45.0 and 30.0kPa

Highly efficient CO2 capture using 2-methylimidazole aqueous solution on laboratory and pilot-scale

Nitric oxide removal from flue gas coupled with the FeIIEDTA regeneration by ultraviolet irradiation