The Finite Element Analysis for Parallel-wire Capacitance Probe in Small Diameter Two-phase Flow Pipe

Your Location：

Home >

Browse articles >

研究简报 | Updated：2026-01-06

- The Finite Element Analysis for Parallel-wire Capacitance Probe in Small Diameter Two-phase Flow Pipe
- The Finite Element Analysis for Parallel-wire Capacitance Probe in Small Diameter Two-phase Flow Pipe
- 中国化学工程学报（英文版） 2013年21卷第7期页码：813-8191004-9541
- Affiliations：
  
  School of Electrical Engineering & Automation, Tianjin University,Tianjin,China,300072
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(13)60501-X
  中图分类号：
- 纸质出版：2013
- Accepted：
Scan QR Code
翟路生, 金宁德, 高忠科, 等. The Finite Element Analysis for Parallel-wire Capacitance Probe in Small Diameter Two-phase Flow Pipe[J]. 中国化学工程学报（英文版）, 2013,21(7):813-8191004-9541.

ZHAI Lusheng, JIN Ningde, GAO Zhongke, HUANG Xu . The Finite Element Analysis for Parallel-wire Capacitance Probe in Small Diameter Two-phase Flow Pipe[J]. Chin.J.Chem.Eng., 2013, 21(7): 813-819.
翟路生, 金宁德, 高忠科, 等. The Finite Element Analysis for Parallel-wire Capacitance Probe in Small Diameter Two-phase Flow Pipe[J]. 中国化学工程学报（英文版）, 2013,21(7):813-8191004-9541. DOI： 10.1016/S1004-9541(13)60501-X.

ZHAI Lusheng, JIN Ningde, GAO Zhongke, HUANG Xu . The Finite Element Analysis for Parallel-wire Capacitance Probe in Small Diameter Two-phase Flow Pipe[J]. Chin.J.Chem.Eng., 2013, 21(7): 813-819. DOI： 10.1016/S1004-9541(13)60501-X.

This paper presents a novel capacitance probe

i.e.

parallel-wire capacitance probe (PWCP)

for two-phase flow measurement. Using finite element method (FEM)

the sensitivity field of the PWCP is investigated and the optimum sensor geometry is determiend in term of the characterisitc parameters. Then

the response of PWCP for the oil-water stratified flow is calculated

and it is found the PWCP has better linearity and sensitivity to the variation of water-layer thickness

and is almost independant of the angle between the oil-water interface and the sensor electrode. Finally

the static experiment for oil-water stratified flow is carried out and the calibration method of liquid holdup is presented.

浏览量

214

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Patterned catalyst layer boosts the performance of proton exchange membrane fuel cells by optimizing water management

Numerical simulation of low-concentration CO2 adsorption on fixed bed using finite element analysis

Dual-site engineering of Ga-modified HZSM-5 towards efficient propane aromatization

Recovery rubidium chloride and cyclic utilization of hexacyanoferrate(II) ion from hexacyanoferrate-internediate solutions via solvent extraction

Synergistic Ba/Na promotion of BaFe2O4-derived catalysts for enhanced CO2 hydrogenation to light olefins