Investigation into Syngas Generation from Solid Fuel Using CaSO<sub>4</sub>-based Chemical Looping Gasification Process

刘永卓; 郭庆杰

doi:10.1016/S1004-9541(13)60450-4

Your Location：

Home >

Browse articles >

Investigation into Syngas Generation from Solid Fuel Using CaSO₄-based Chemical Looping Gasification Process

催化、动力学与反应工程 | Updated：2026-01-06

- Investigation into Syngas Generation from Solid Fuel Using CaSO₄-based Chemical Looping Gasification Process
- Investigation into Syngas Generation from Solid Fuel Using CaSO₄-based Chemical Looping Gasification Process
- 中国化学工程学报（英文版） 2013年21卷第2期页码：127-1341004-954160450-4
- Affiliations：
  
  College of Chemical Engineering, Qingdao University of Science & Technology, Key Laboratory of Clean Chemical Processing Engineering of Shandong Province,Qingdao,China,266042
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(13)60450-4
  中图分类号：
- 纸质出版：2013
- Accepted：
Scan QR Code
刘永卓, 郭庆杰. Investigation into Syngas Generation from Solid Fuel Using CaSO₄-based Chemical Looping Gasification Process[J]. 中国化学工程学报（英文版）, 2013,21(2):127-1341004-954160450-4. DOI: 10.1016/S1004-9541(13)60450-4.

-based Chemical Looping Gasification Process[J]. Chinese Journal of Chemical Engineering, 2013, 21(2): 127-134.
刘永卓, 郭庆杰. Investigation into Syngas Generation from Solid Fuel Using CaSO₄-based Chemical Looping Gasification Process[J]. 中国化学工程学报（英文版）, 2013,21(2):127-1341004-954160450-4. DOI: 10.1016/S1004-9541(13)60450-4. DOI：

-based Chemical Looping Gasification Process[J]. Chinese Journal of Chemical Engineering, 2013, 21(2): 127-134. DOI： 10.1016/S1004-9541(13)60450-4.

摘要

Abstract

Chemical-looping gasification (CLG) is a novel process for syngas generation from solid fuels

sharing the same basic principles as chemical-looping combustion (CLC). It also uses oxygen carriers (mainly metal oxide and calcium sulfate) to transfer heat and oxygen to the fuel. In this paper

the primary investigation into the CLG process with CaSO

as oxygen carrier was carried out by thermodynamic analysis and experiments in the tube reactor. Sulfur-contained gas emission was mainly H

S rather than SO

in the CLG process

showing some different features from the CLC. The mass and heat balance of CLG processes were calculated thermodynamically to determinate the auto-thermal operating conditions with different CaSO

/C and steam/C molar ratios. It was found that the CaSO

/C molar ratio should be higher than 0.2 to reach auto-thermal balance. The effect of temperature on the reactions between oxygen carrier and coal was investigated based on Gibbs free energy minimum method and experimental results. It indicated that high temperature favored the CLG process in the fuel reactor and part of syngas was consumed to compensate for auto-thermal system.

关键词

Keywords

references

浏览量

161

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Effect of Gasifying Medium on the Coal Chemical Looping Gasification with CaSO4 as Oxygen Carrier

Thermodynamic feasibility of nickel and cerium oxides as versatile oxygen carriers in chemical looping reforming of methane-rich feedstocks

Syngas production from chemical looping reforming of ethanol over iron-based oxygen carriers: Theoretical analysis and experimental investigation

Thermodynamic analysis on the direct preparation of metallic vanadium from NaVO3 by molten salt electrolysis

Synergistically coupling of vertically oriented Ru/Co co-doped MoS2 with interfacial engineering for efficient electrochemical hydrogen evolution

Investigation into Syngas Generation from Solid Fuel Using CaSO4-based Chemical Looping Gasification Process

Investigation into Syngas Generation from Solid Fuel Using CaSO4-based Chemical Looping Gasification Process

DOI：10.1016/S1004-9541(13)60450-4

摘要

Abstract

关键词

Keywords

references

Investigation into Syngas Generation from Solid Fuel Using CaSO₄-based Chemical Looping Gasification Process

Investigation into Syngas Generation from Solid Fuel Using CaSO₄-based Chemical Looping Gasification Process