Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert

Smith Eiamsa-ard; Narin Koolnapadol; Pongjet Promvonge

doi:10.1016/S1004-9541(12)60411-X

Your Location：

Home >

Browse articles >

Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert

Updated：2026-01-06

- Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert
- Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert
- 中国化学工程学报（英文版） 2012年20卷第5期页码：863-869
- Affiliations：
  
  1. Department of Mechanical Engineering, Faculty of Engineering, Mahanakorn University of Technology,Bangkok,Thailand,10530
  2. Department of Mechanical Engineering, Faculty of Engineering, King Mongkut's Institute of Technology Ladkrabang,Bangkok,Thailand,10520
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(12)60411-X
  中图分类号：
- 纸质出版：2012
- Accepted：
Scan QR Code
Smith Eiamsa-ard, Narin Koolnapadol, Pongjet Promvonge. Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert[J]. 中国化学工程学报（英文版）, 2012,20(5):863-869.

Smith Eiamsa-ard, Narin Koolnapadol, Pongjet Promvonge. Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert[J]. Chin.J.Chem.Eng., 2012, 20(5): 863-869.
Smith Eiamsa-ard, Narin Koolnapadol, Pongjet Promvonge. Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert[J]. 中国化学工程学报（英文版）, 2012,20(5):863-869. DOI： 10.1016/S1004-9541(12)60411-X.

Smith Eiamsa-ard, Narin Koolnapadol, Pongjet Promvonge. Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert[J]. Chin.J.Chem.Eng., 2012, 20(5): 863-869. DOI： 10.1016/S1004-9541(12)60411-X.

摘要

Abstract

Effects of insertion of tandem wire coil elements used as turbulator on heat transfer and turbulent flow friction characteristics in a uniform heat-flux square duct are experimentally investigated in this work. The experiment is conducted for turbulent flow with the Reynolds number from 4000 to 25000. The wire coil element is inserted into the duct with a view to generating a swirl flow that assists to wash up the flow trapped in the duct corners and then increase the heat transfer rate of the test duct. Apart from the full-length coil

and 2

length coil elements placed in tandem inside the duct with various free-space lengths are introduced to reduce the friction loss. The results obtained from these wire coil element inserts are also compared with those from the smooth duct. The experimental results reveal that the use of wire coil inserts for the full-length coil

and 2

coil elements with a short free-space length leads to a considerable increase in heat transfer and friction loss over the smooth duct with no insert. The full-length wire coil provides higher heat transfer and friction factor than the tandem wire coil elements under the same operating conditions. Also

performance evaluation criteria to assess the real benefits in using the wire coil insert into the square duct are determined.

关键词

Keywords

references

浏览量

253

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Inhibition research of double protection on flame propagations of hydrogen doped methane explosions

Research on the prediction model of effective thermal conductivity of marine natural gas hydrate reservoirs based on machine learning

Multiphysics coupling rule of semi-coke catalytic tar cracking

Thermal coupling study during the co-processing of coal and biomass in the lab-scale adiabatic reactor

Enhanced thermal conductivity and mechanical properties of boron nitride@polymethylacrylimide/epoxy composites with self-assembled stable three-dimensional network