CO<sub>2</sub> Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers

徐冬; Penny Xiao; 李刚; 张军; Paul Webley; 翟玉春

doi:10.1016/S1004-9541(12)60409-1

Your Location：

Home >

Browse articles >

CO₂ Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers

Updated：2026-01-06

- CO₂ Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers
- CO₂ Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers
- 中国化学工程学报（英文版） 2012年20卷第5期页码：849-855
- Affiliations：
  
  1. Guodian New Energy Technology Research Institute, China Guodian Corporation,Beijing,China,100034
  2. Department of Chemical Engineering, Monash University,Melbourne,Australia,3186
  3. School of Material and Metallurgy, Northeastern University,Shenyang,China,110004
- Author bio：
- Funds：
  
  Supported by the National Natural Science Foundation of China (51074205);Corporate Research Centre for Greenhouse Gas Technology Foundation in Australia
- DOI：10.1016/S1004-9541(12)60409-1
  中图分类号：
- 纸质出版：2012
- Accepted：
Scan QR Code
徐冬, Penny Xiao, 李刚, 等. CO₂ Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers[J]. 中国化学工程学报（英文版）, 2012,20(5):849-855. DOI: 10.1016/S1004-9541(12)60409-1.

Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers[J]. Chinese Journal of Chemical Engineering, 2012, 20(5): 849-855.
徐冬, Penny Xiao, 李刚, 等. CO₂ Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers[J]. 中国化学工程学报（英文版）, 2012,20(5):849-855. DOI: 10.1016/S1004-9541(12)60409-1. DOI：

Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers[J]. Chinese Journal of Chemical Engineering, 2012, 20(5): 849-855. DOI： 10.1016/S1004-9541(12)60409-1.

摘要

Abstract

In order to solve the water issues when 13X zeolite was applied to capture CO

from wet flue gas by vacuum swing adsorption process

multi-layered adsorption system was considered regarding activated alumina F200 and silica gel based Sorbead WS as pre-layer materials. LBET (extended Largmuir-BET) model and extended CMMS (cooperative multimolecular sorption) equation were simulated respectively to describe water loading on F200 and Sorbead WS. The two equations can be well added into our in-house simulator to simulate double-layered CO

-VSA (vacuum swing adsorption) process. Results indicated that water can be successfully stopped in pre-layers with a good CO

capture performance.

关键词

Keywords

references

浏览量

326

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Strategies for CO2 capture from different CO2 emission sources by vacuum swing adsorption technology

Preparation and performance analysis of non-aqueous absorbents based on alcohol ether organic compounds for CO2 capture

Hydrogen production from biomass waste gasification under the enhancement of catalyst-sorbent hybrid functional material synthesized from steel slag

The template-free synthesis of zeolite NaY for CO2 capture

Regulation of interlayer channels of graphene oxide nanosheets in ultra-thin Pebax mixed-matrix membranes for CO2 capture

CO2 Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers

CO2 Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers

DOI：10.1016/S1004-9541(12)60409-1

摘要

Abstract

关键词

Keywords

references

CO₂ Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers

CO₂ Capture by Vacuum Swing Adsorption Using F200 and Sorbead WS as Protective Pre-layers