Flame Imaging in Meso-scale Porous Media Burner Using Electrical Capacitance Tomography

陈琪; 刘石

doi:10.1016/S1004-9541(12)60395-4

Your Location：

Home >

Browse articles >

Flame Imaging in Meso-scale Porous Media Burner Using Electrical Capacitance Tomography

SELECTED PAPERS FROM THE 6TH WORLD CONGRESS ON INDUSTRIAL PROCESS TOMOGRAPHY (WCIPT6) | Updated：2026-01-06

- Flame Imaging in Meso-scale Porous Media Burner Using Electrical Capacitance Tomography
- Flame Imaging in Meso-scale Porous Media Burner Using Electrical Capacitance Tomography
- 中国化学工程学报（英文版） 2012年20卷第2期页码：329-336
- Affiliations：
  
  1. School of Mechanical Electronic and Control Engineering, Beijing Jiaotong University,Beijing,China,100044
  2. State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University,Beijing,China,102206
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(12)60395-4
  中图分类号：
- 纸质出版：2012
- Accepted：
Scan QR Code
陈琪, 刘石. Flame Imaging in Meso-scale Porous Media Burner Using Electrical Capacitance Tomography[J]. 中国化学工程学报（英文版）, 2012,20(2):329-336.

CHEN Qi, LIU Shi. Flame Imaging in Meso-scale Porous Media Burner Using Electrical Capacitance Tomography[J]. , 2012, 20(2): 329-336.
陈琪, 刘石. Flame Imaging in Meso-scale Porous Media Burner Using Electrical Capacitance Tomography[J]. 中国化学工程学报（英文版）, 2012,20(2):329-336. DOI： 10.1016/S1004-9541(12)60395-4.

CHEN Qi, LIU Shi. Flame Imaging in Meso-scale Porous Media Burner Using Electrical Capacitance Tomography[J]. , 2012, 20(2): 329-336. DOI： 10.1016/S1004-9541(12)60395-4.

摘要

Abstract

This study was conducted to investigate the characteristics of meso-scale combustion.The technique of electrical capacitance tomography(ECT) was used to locate flame position and monitor the effect corresponding to varied air/fuel ratio in a meso-scale combustor.Combustion phenomena including igniting

quenching and unsteady combustion have been visualized using ECT.The method of metallization protecting ECT sensor from high temperature damage and the novel calibration method adapted to ECT monitoring of unknown permittivity flame have been shown to be successful.At the same time

electrical nature of combustion and dielectric characteristics of hy-drocarbon flame were studied.The relationship between flame permittivity and state parameters of combustion gas was demonstrated preliminarily.

关键词

Keywords

references

浏览量

1131

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Enhanced combustion and hydrophobic performance of aluminum micro-particles coated with high-energy fluorine-containing materials

Evaluation of live Cryo-ECT system for liquid nitrogen-vapor nitrogen flow

Effects of noise on fluidized bed characteristics measurements by electrical capacitance tomography

Stochastic analysis in gasesolid two-phase flow in the dense-phase pneumatic conveying of pulverized coal

A comprehensive fractal char combustion model