Low-temperature Electrodeposition of Aluminium from Lewis Acidic 1-Allyl-3-methylimidazolium Chloroaluminate Ionic Liquids
|Updated:2026-01-06
|
Low-temperature Electrodeposition of Aluminium from Lewis Acidic 1-Allyl-3-methylimidazolium Chloroaluminate Ionic Liquids
Low-temperature Electrodeposition of Aluminium from Lewis Acidic 1-Allyl-3-methylimidazolium Chloroaluminate Ionic Liquids
中国化学工程学报(英文版)2012年20卷第1期 页码:130-139
Affiliations:
1. Beijing Key Laboratory of Ionic Liquids Clean Process, State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences,Beijing,China,100190
2. College of Chemistry and Chemical Engineering, Graduate University of Chinese Academy of Sciences,Beijing,China,100049
Author bio:
Funds:
Supported by the National Basic Research Program of China (2009CB219901);the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (2012BAF03B01);the National Natural Science Foundation of China (20906096,20873152);the Open-end Fund of State Key Laboratory of Multiphase Complex Systems (MPCS-2011-D-06)
Lewis acidic 1-allyl-3-methylimidazolium chloroaluminate ionic liquids were used as promising electrolytes in the low-temperature electrodeposition of aluminium.Systematic studies on deposition process have been performed by cyclic voltammetry and chronoamperometry.The surface morphology and X-ray diffraction(XRD) patterns of deposits prepared at different experimental conditions were also investigated.It was shown that the nu-cleation density and growth rate of crystallites had a great effect on the structure of aluminium deposited.The crys-tallographic orientation of deposits was mainly influenced by temperature and current density.Smooth
dense and well adherent aluminium coatings were obtained on copper substrates at 10-25 mA·cm
-2
and 313.2-353.2 K.More-over
the current efficiency of deposition and purity of aluminium have been significantly improved
demonstrating that the ionic liquids tested have a prospectful potential in electroplating and electrorefining of aluminium.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Impact of CO2 cycloaddition reaction on hydrodynamics and mass transfer behavior of CO2-ionic liquid system in a capillary reactor
Mass transfer and kinetic behavior studies on cycloaddition of carbon dioxide with propylene oxide catalyzed by ionic liquid in microchannel reactor
Ionic liquids screened by COSMO-RS for phase equilibrium separation of 2-methylfuran and methanol: Thermodynamic and mechanistic analysis
Recycle of graphite and recovery of valuable metals from industrial-grade black mass of spent lithium-ion battery
Catalytic performance and acidic analysis of chloroaluminate ionic liquid with various impurities in the synthesis of multi-octylnaphthalene base oil
相关作者
Yang Yiqian
Wang Gang
Sun Xiaoyan
Xiang Shuguang
Li Chunshan
Chen Yu
Yan Hanwen
Wang Lili
相关机构
Institute of Process Systems Engineering, College of Chemical Engineering, Qingdao University of Science and Technology
State Key Laboratory of Mesoscience and Engineering, CAS Key Laboratory of Green Process and Engineering, Beijing Key Laboratory of Solid-State Battery and Energy Storage Process, Institute of Process Engineering, Chinese Academy of Sciences
Liaoning Provincial Key Laboratory of Chemical Separation Technology, Shenyang University of Chemical Technology
College of Materials Science and Engineering, Shenyang University of Technology
School of Chemistry and Chemical Engineering, Shandong University of Technology