Venting Design for Di-<i>tert</i>-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test

魏彤彤; 蒋慧灵

doi:10.1016/S1004-9541(11)60239-5

Your Location：

Home >

Browse articles >

Venting Design for Di-tert-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test

Updated：2026-01-06

- Venting Design for Di-tert-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test
- Venting Design for Di-tert-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test
- 中国化学工程学报（英文版） 2012年20卷第4期页码：710-714
- Affiliations：
  
  Department of Fire Protection Engineering, Chinese People's Armed Police Force Academy,Langfang,China,065000
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(11)60239-5
  中图分类号：
- 纸质出版：2012
- Accepted：
Scan QR Code
魏彤彤, 蒋慧灵. Venting Design for Di-tert-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test[J]. 中国化学工程学报（英文版）, 2012,20(4):710-714. DOI: 10.1016/S1004-9541(11)60239-5.

-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test[J]. Chinese Journal of Chemical Engineering, 2012, 20(4): 710-714.
魏彤彤, 蒋慧灵. Venting Design for Di-tert-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test[J]. 中国化学工程学报（英文版）, 2012,20(4):710-714. DOI: 10.1016/S1004-9541(11)60239-5. DOI：

-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test[J]. Chinese Journal of Chemical Engineering, 2012, 20(4): 710-714. DOI： 10.1016/S1004-9541(11)60239-5.

摘要

Abstract

In order to design the relief system size of di-

tert

-butyl peroxide(DTBP) storage tanks

the runaway re-action of DTBP was simulated by accelerating rate calorimeter(ARC).The results indicated that under adiabatic conditions the initial exothermic temperature was 102.6℃

the maximum self-heating rate was 3.095×10

℃·min

-1

the maximum self-heating temperature was 375.9℃

and the pressure produced by unit mass was 4.512 MPa·g

-1

.Judged by ARC test

the emergency relief system for DTBP was a hybrid system.Based on Design Institute for Emergency Relief System(DIERS) method

the releasing mass flow rate W was determined by Leung methods

and the mass velocity G was calculated by two modified Omega methods.The two relief sizes calculated by monograph Omega method and arithmetic Omega method are close

with only 0.63% relative error.The monograph Omega method is more convenient to apply.

关键词

Keywords

references

浏览量

2157

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis

Controllable synthesis of Ni3S2/V3S4@NF-xF(x=0, 4, 8) catalysts for efficient hydrogen production in seawater and urea electrolyte

Synthesis of chemiluminescent carbonized polymer dots under atmospheric conditions for multimode luminescence anti-counterfeiting

Tailoring the molecular structure of cross-linked poly(ethylene oxide) membranes for enhanced CO2 permeation

Mechanochemical preparation and properties of B-N doped carbon materials based on calcium carbide

Venting Design for Di-tert-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test

Venting Design for Di-tert-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test

DOI：10.1016/S1004-9541(11)60239-5

摘要

Abstract

关键词

Keywords

references