Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes

V. Khandegar; Anil. K. Saroha

doi:10.1016/S1004-9541(11)60204-8

Your Location：

Home >

Browse articles >

Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes

香港科技大学化学与生物分子工程系戈登·麦凯教授退休纪念专刊 | Updated：2026-01-06

- Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes
- Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes
- 中国化学工程学报（英文版） 2012年20卷第3期页码：439-443
- Affiliations：
  
  Department of Chemical Engineering, Indian Institute of Technology, Delhi Hauz Khas,New Delhi,India,110016
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(11)60204-8
  中图分类号：
- 纸质出版：2012
- Accepted：
Scan QR Code
V. Khandegar, Anil. K. Saroha. Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes[J]. 中国化学工程学报（英文版）, 2012,20(3):439-443.

V. Khandegar, Anil. K. Saroha. Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes[J]. , 2012, 20(3): 439-443.
V. Khandegar, Anil. K. Saroha. Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes[J]. 中国化学工程学报（英文版）, 2012,20(3):439-443. DOI： 10.1016/S1004-9541(11)60204-8.

V. Khandegar, Anil. K. Saroha. Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes[J]. , 2012, 20(3): 439-443. DOI： 10.1016/S1004-9541(11)60204-8.

摘要

Abstract

Electrochemical treatment of distillery spent wash was carried out using different combinations of aluminum and iron electrodes in batch mode of operation.The spent wash was characterized for various parameters as per standard method of analysis and the treatment results were analyzed in terms of chemical oxygen demand(COD) removal efficiency of the spent wash.The experiments were performed to study the effect of operating parameters such as current density

pH of the spent wash

agitation speed

electrolysis time and the distance between the electrodes on the COD removal efficiency of the spent wash.It was observed that aluminum electrodes were more suitable for treatment of distillery spent wash as compared to iron electrodes.The maximum COD removal efficiency of 81.3% was obtained with Al-Al electrodes at the current density of 0.187 A·cm

-2

and pH 3 for an electrolysis time of 2 h.

关键词

Keywords

references

浏览量

3950

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Dissolution kinetics of aluminum and iron from coal mining waste by hydrochloric acid

Fe, N-decorated carbocatalyst based on Fe-MOF as PDS activator for efficient sulfadiazine degradation: An electron transfer process

Multi-objective optimization of wastewater treatment using electrocoagulation

Mass-producible low-cost flexible electronic fabrics for azo dye wastewater treatment by electrocoagulation

Optimization of continuous electrocoagulation-adsorption combined process for the treatment of a textile effluent