Recovery of Copper(II) and Nickel(II) from Plating Wastewater by Solvent Extraction

李立清; 钟宏; 曹占芳; 袁露

doi:10.1016/S1004-9541(11)60073-6

Your Location：

Home >

Browse articles >

Recovery of Copper(II) and Nickel(II) from Plating Wastewater by Solvent Extraction

Updated：2026-01-06

- Recovery of Copper(II) and Nickel(II) from Plating Wastewater by Solvent Extraction
- Recovery of Copper(II) and Nickel(II) from Plating Wastewater by Solvent Extraction
- 中国化学工程学报（英文版） 2011年19卷第6期页码：926-930
- Affiliations：
  
  1. School of Chemistry and Chemical Engineering, Central South University,Changsha,China,410083
  2. School of Metallurgical and Chemical Engineering, Jiangxi University of Science and Technology,Ganzhou,China,34100
- Author bio：
- Funds：
  
  Supported by the National Key Technologies Research and Development Program of China during the 11th Five-Year Plan Period (2007BAB22B01);the Young Science Foundation of Jiangxi Province Education Office (GJJ11124)
- DOI：10.1016/S1004-9541(11)60073-6
  中图分类号：
- 纸质出版：2011
- Accepted：
Scan QR Code
李立清, 钟宏, 曹占芳, 等. Recovery of Copper(II) and Nickel(II) from Plating Wastewater by Solvent Extraction[J]. 中国化学工程学报（英文版）, 2011,19(6):926-930.

LI Liqing, ZHONG Hong, CAO Zhanfang, YUAN Lu. Recovery of Copper(II) and Nickel(II) from Plating Wastewater by Solvent Extraction[J]. , 2011, 19(6): 926-930.
李立清, 钟宏, 曹占芳, 等. Recovery of Copper(II) and Nickel(II) from Plating Wastewater by Solvent Extraction[J]. 中国化学工程学报（英文版）, 2011,19(6):926-930. DOI： 10.1016/S1004-9541(11)60073-6.

LI Liqing, ZHONG Hong, CAO Zhanfang, YUAN Lu. Recovery of Copper(II) and Nickel(II) from Plating Wastewater by Solvent Extraction[J]. , 2011, 19(6): 926-930. DOI： 10.1016/S1004-9541(11)60073-6.

摘要

Abstract

The solvent extraction technology was applied to recover Cu

and Ni

from plating wastewater. Lix984N was chosen as the extractant due to its good extraction performance. The influence parameters were examined. The results show that the separation of Cu

and Ni

from sulphate medium can be realized by adjusting pH value with the help of Lix984N. For extracting Cu

and Ni

the optimal pH values are 4 and 10.5

and the maximal extraction percentages are 92.9% and 93.0%

respectively. With recovered Cu

and Ni

stripped in 170 g·L

-1

and 200 g·L

-1

medium

the stripping percentages of Cu

and Ni

are 92.9% and 93.0%

respectively. This method is simple and can be used to recover Cu

and Ni

from plating wastewater. And a flow sheet for separation of Cu

and Ni

is presented.

关键词

Keywords

references

浏览量

1675

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Recovery rubidium chloride and cyclic utilization of hexacyanoferrate(II) ion from hexacyanoferrate-internediate solutions via solvent extraction

The separation and recovery of copper(Ⅱ), nickel(Ⅱ), cobalt(Ⅱ), zinc(Ⅱ), and cadmium(Ⅱ) in a sulfate-based solution using a mixture of Versatic 10 acid and Mextral 984H

Synthesis of ZSM-5 zeolite from desiliconization solution of coal fly ash and adsorption properties of Pb2+ containing wastewater

Highly enhanced scandium extraction and back-extraction efficiencies using a new C272—iso-octanol synergistic system

Copper hexacyanoferrate framework with dual redox centers for selective lithium extraction in hybrid capacitive deionization