Fabrication of SPES/Nano-TiO<sub>2</sub> Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism

罗明良; 温庆志; 刘佳林; 刘洪见; 贾自龙

doi:10.1016/S1004-9541(09)60175-0

Your Location：

Home >

Browse articles >

Fabrication of SPES/Nano-TiO₂ Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism

Updated：2026-01-06

- Fabrication of SPES/Nano-TiO₂ Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism
- Fabrication of SPES/Nano-TiO₂ Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism
- 中国化学工程学报（英文版） 2011年19卷第1期页码：45-51
- Affiliations：
  
  College of Petroleum Engineering, China University of Petroleum(East China),Qingdao,China,266555
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(09)60175-0
  中图分类号：
- 纸质出版：2011
- Accepted：
Scan QR Code
罗明良, 温庆志, 刘佳林, 等. Fabrication of SPES/Nano-TiO₂ Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism[J]. 中国化学工程学报（英文版）, 2011,19(1):45-51. DOI: 10.1016/S1004-9541(09)60175-0.

Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism[J]. , 2011, 19(1): 45-51.
罗明良, 温庆志, 刘佳林, 等. Fabrication of SPES/Nano-TiO₂ Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism[J]. 中国化学工程学报（英文版）, 2011,19(1):45-51. DOI: 10.1016/S1004-9541(09)60175-0. DOI：

Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism[J]. , 2011, 19(1): 45-51. DOI： 10.1016/S1004-9541(09)60175-0.

摘要

Abstract

Membrane fouling is one of the major obstacles for reaching a high flux over a prolonged period of ultrafiltration(UF)process.In this study

a sulfonated-polyethersulfone(SPES)/nano-TiO

composite UF membrane with good anti-fouling performance was fabricated by phase inversion and self-assembly methods.The TiO

nanoparticle self-assembly on the SPES membrane surface was confirmed by X-ray photoelectron spectroscopy (XPS)and FT-IR spectrometer.The morphology and hydrophilicity were characterized by scanning electron microscopy(SEM)

atomic force microscopy(AFM)and contact angle goniometer

respectively.The anti-fouling mechanism of composite UF membrane was discussed through the analysis of the micro-structure and component of UF membrane surface.The results showed that the TiO

content and the micro-structure of the composite UF membrane surface had great influence on the separation and anti-fouling performance.

关键词

Keywords

references

浏览量

2770

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Preparation of novel hierarchical porous Fe2O3/SBA-15 with microporous plugs from coal gasification fine residue and its degradation of phenol in coal chemical wastewater

Enhanced SO2 reduction to sulfur over mesoporous MoS2-Al2O3 catalyst

Graphene oxide-polyethyleneimene-silicon dioxide nanocomposite-doped polysulfone ultrafiltration membrane oily water treatment

Atomic layer deposition ultrathin amorphous TiO2 film in a fluidized bed reactor for improving the weatherability of TiO2 pigment

Coarse-grained molecular dynamics simulations on self-assembly of polystyrene-block-poly(2-vinylpyridine)

Fabrication of SPES/Nano-TiO2 Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism

Fabrication of SPES/Nano-TiO2 Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism

DOI：10.1016/S1004-9541(09)60175-0

摘要

Abstract

关键词

Keywords

references

Fabrication of SPES/Nano-TiO₂ Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism

Fabrication of SPES/Nano-TiO₂ Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism