A 10kW-scale Distributed Power Plant of Natural Gas-Proton Exchange Membrane Fuel Cell

包成; 苏庆泉; 米万良; 李志远; 毕全; 冀中华; 刘志祥; 毛宗强

doi:10.1016/S1004-9541(09)60157-9

Your Location：

Home >

Browse articles >

A 10kW-scale Distributed Power Plant of Natural Gas-Proton Exchange Membrane Fuel Cell

Updated：2026-01-06

- A 10kW-scale Distributed Power Plant of Natural Gas-Proton Exchange Membrane Fuel Cell
- A 10kW-scale Distributed Power Plant of Natural Gas-Proton Exchange Membrane Fuel Cell
- 中国化学工程学报（英文版） 2010年18卷第6期页码：988-994
- Affiliations：
  
  1. Department of Thermal Science and Energy Engineering, School of Mechanical Engineering, University of Science & Technology Beijing,Beijing,China,100083
  2. Hanergy Technology Co., Ltd.,Beijing,China,102209
  3. Institute of Nuclear and New Energy Technology, Tsinghua University,Beijing,China,100084
- Author bio：
- Funds：
  
  Supported by the Beijing Municipal Major Science & Technology Project(D0406001000091);the National Natural Science Foundation of China(50706019)
- DOI：10.1016/S1004-9541(09)60157-9
  中图分类号：
- 纸质出版：2010
- Accepted：
Scan QR Code
包成, 苏庆泉, 米万良, 等. A 10kW-scale Distributed Power Plant of Natural Gas-Proton Exchange Membrane Fuel Cell[J]. 中国化学工程学报（英文版）, 2010,18(6):988-994.

BAO Cheng, SU Qingquan, MI Wanliang, LI Zhiyuan, BI Quan, JI Zhonghua, LIU Zhixiang, MAO Zongqiang. A 10kW-scale Distributed Power Plant of Natural Gas-Proton Exchange Membrane Fuel Cell[J]. , 2010, 18(6): 988-994.
包成, 苏庆泉, 米万良, 等. A 10kW-scale Distributed Power Plant of Natural Gas-Proton Exchange Membrane Fuel Cell[J]. 中国化学工程学报（英文版）, 2010,18(6):988-994. DOI： 10.1016/S1004-9541(09)60157-9.

BAO Cheng, SU Qingquan, MI Wanliang, LI Zhiyuan, BI Quan, JI Zhonghua, LIU Zhixiang, MAO Zongqiang. A 10kW-scale Distributed Power Plant of Natural Gas-Proton Exchange Membrane Fuel Cell[J]. , 2010, 18(6): 988-994. DOI： 10.1016/S1004-9541(09)60157-9.

摘要

Abstract

A 10 kW-scale natural gas fueled proton exchange membrane fuel cell(PEMFC) distributed power plant is presented in this paper

which is designed for cogeneration of power and heat. With homemade catalysts for CO removal in a two-stage methanation process and integrated reactor in the fuel processing system

the reformed fuel with CO molar fraction less than 10

-5

is obtained for the fuel cell stack. Based on Matlab/Simulink/Stateflow and xPC Target platform

a rapid control prototype(RCP) is developed for real-time condition management

signal tracking and parameter tuning

data storing

and man-machine interaction. In a typical running with 4.3 kW stack power

the hydrogen production efficiency

gross power generation efficiency and heat recovery efficiency approach to 76%

41% and 50%

respectively. The peak stack power reaches 7.3 kW. Though there is still considerable distance to long-term operation at 10 kW-scale net power generation

it is a milestone for the PEMFC-based stationary application in China.

关键词

Keywords

references

浏览量

149

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Enhancing corrosion resistance of heat-assisted forming titanium bipolar plate for proton exchange membrane fuel cell through optimized heat treatment

Novel polytriazole polymer membranes materials developed for the purification and separation of natural gas under high upstream feed pressure

Copper-based metal–organic framework with two methane traps for efficient CH4/N2 separation

Numerical studies on rib and channel designs considering interfacial contact resistance

Effects of baffle position in serpentine flow channel on the performance of proton exchange membrane fuel cells