杨权, Giuseppe Mosca, Mario Roza. Characteristics of Trays Using Inertial Separation Technology[J]. 中国化学工程学报(英文版), 2010,18(6):954-961.
YANG Quan, Giuseppe Mosca, Mario Roza. Characteristics of Trays Using Inertial Separation Technology[J]. , 2010, 18(6): 954-961.
杨权, Giuseppe Mosca, Mario Roza. Characteristics of Trays Using Inertial Separation Technology[J]. 中国化学工程学报(英文版), 2010,18(6):954-961.DOI: 10.1016/S1004-9541(09)60153-1.
YANG Quan, Giuseppe Mosca, Mario Roza. Characteristics of Trays Using Inertial Separation Technology[J]. , 2010, 18(6): 954-961.DOI: 10.1016/S1004-9541(09)60153-1.
Characteristics of Trays Using Inertial Separation Technology
Jaeger CoFloTM and Shell ConSepTM trays fall into the same category of trays using inertial separation technology. However
flooding mechanisms and the trends of entrainment and efficiency are different due to their different working principles. This paper provides a detailed analysis of these trays using available information from literature and U.S. Patents. Efforts are also made to interpret the observations reported. In terms of tray efficiency
it is found that SimulFlow
UltraFrac and CoFlo trays are typical point efficiency devices due to a completely mixed liquid pool on the tray deck
while ConSep trays can take advantage of liquid concentration gradient on the tray deck
which makes this tray attractive among all ultra high capacity trays.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Bubble dispersion intensification via flow guidance and drainage in a bubble column with internals
Mechanochemical preparation and properties of B-N doped carbon materials based on calcium carbide
CO2 leakage behavior from CO2 hydrate-liquid CO2-seawater coexistence system in unsealed sediments
A durable fluorine-free polyurethane-coated fabric with switchable super-wetting properties under mild pH conditions for controllable oil/water separation
Optimizing energy efficiency in fluid catalytic cracking units with GA and NSGA-II: A comprehensive simulation and multi-factor analysis