A Theoretical Model for the Size Prediction of Single Bubbles Formed under Liquid Cross-flow

刘长军; 梁斌; 唐盛伟; 张海广; 闵恩泽

doi:10.1016/S1004-9541(09)60128-2

Your Location：

Home >

Browse articles >

A Theoretical Model for the Size Prediction of Single Bubbles Formed under Liquid Cross-flow

Updated：2026-01-06

- A Theoretical Model for the Size Prediction of Single Bubbles Formed under Liquid Cross-flow
- A Theoretical Model for the Size Prediction of Single Bubbles Formed under Liquid Cross-flow
- 中国化学工程学报（英文版） 2010年18卷第5期页码：770-776
- Affiliations：
  
  1. Multi-phases Mass Transfer and Reaction Engineering Laboratory, College of Chemical Engineering, Sichuan University,Chengdu,China,610065
  2. SINOPEC CORP. Research Institute of Petroleum Processing,Beijing,China,100083
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(09)60128-2
  中图分类号：
- 纸质出版：2010
- Accepted：
Scan QR Code
刘长军, 梁斌, 唐盛伟, 等. A Theoretical Model for the Size Prediction of Single Bubbles Formed under Liquid Cross-flow[J]. 中国化学工程学报（英文版）, 2010,18(5):770-776.

LIU Changjun, LIANG Bin, TANG Shengwei, ZHANG Haiguang, MIN Enze. A Theoretical Model for the Size Prediction of Single Bubbles Formed under Liquid Cross-flow[J]. , 2010, 18(5): 770-776.
刘长军, 梁斌, 唐盛伟, 等. A Theoretical Model for the Size Prediction of Single Bubbles Formed under Liquid Cross-flow[J]. 中国化学工程学报（英文版）, 2010,18(5):770-776. DOI： 10.1016/S1004-9541(09)60128-2.

LIU Changjun, LIANG Bin, TANG Shengwei, ZHANG Haiguang, MIN Enze. A Theoretical Model for the Size Prediction of Single Bubbles Formed under Liquid Cross-flow[J]. , 2010, 18(5): 770-776. DOI： 10.1016/S1004-9541(09)60128-2.

摘要

Abstract

The size of initial bubbles is an important factor to the developed bubble size distribution in a gas-liquid contactor. A liquid cross-flow over a sparger can produce smaller bubbles

and hereby enhance the performance of contactor. A one stage model by balancing the forces acting on a growing bubble was developed to describe the formation of the bubble from an orifice exposed to liquid cross-flow. The prediction with this model agrees with the experimental data available in the literatures

and show that orifice size strongly affects the bubble size. It is showed that the shear-lift force

inertia force

surface tension force and buoyancy force are major forces

and a simplified mathematical model was developed

and the detachment bubble diameter can be predicted with accuracy of

关键词

Keywords

references

浏览量

227

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Determination of interfacial tension and viscosity under dripping flow in a step T-junction microdevice

Modeling of segregation in magnetized fluidized bed with binary mixture of Geldart-B magnetizable and nonmagnetizable particles

Drag-induced breakup mechanism for droplet generation in dripping within flow focusing microfluidics

Synergistically coupling of vertically oriented Ru/Co co-doped MoS2 with interfacial engineering for efficient electrochemical hydrogen evolution

CFD-PBM simulation of liquid-liquid dispersions in an industrial pulsed disc and doughnut column with directly measured breakup and coalescence kernels