Clathrate Hydrate Capture of CO<sub>2</sub> from Simulated Flue Gas with Cyclopentane/Water Emulsion

李士凤; 樊栓狮; 王金渠; 郎雪梅; 王燕鸿

doi:10.1016/S1004-9541(08)60343-2

Your Location：

Home >

Browse articles >

Clathrate Hydrate Capture of CO₂ from Simulated Flue Gas with Cyclopentane/Water Emulsion

Updated：2026-01-06

- Clathrate Hydrate Capture of CO₂ from Simulated Flue Gas with Cyclopentane/Water Emulsion
- Clathrate Hydrate Capture of CO₂ from Simulated Flue Gas with Cyclopentane/Water Emulsion
- 中国化学工程学报（英文版） 2010年18卷第2期页码：202-206
- Affiliations：
  
  1. State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology,Dalian,China,116012
  2. Key Laboratory of Enhanced Heat Transfer and Energy Conversation, Ministry of Education, South China University of Technology,Guangzhou,China,510640
- Author bio：
- Funds：
  
  Supported by the National High Technology Research and Development Program of China (2007AA03Z229);the National Natural Science Foundation of China(20876019)
- DOI：10.1016/S1004-9541(08)60343-2
  中图分类号：
- 纸质出版：2010
- Accepted：
Scan QR Code
李士凤, 樊栓狮, 王金渠, 等. Clathrate Hydrate Capture of CO₂ from Simulated Flue Gas with Cyclopentane/Water Emulsion[J]. 中国化学工程学报（英文版）, 2010,18(2):202-206. DOI: 10.1016/S1004-9541(08)60343-2.

from Simulated Flue Gas with Cyclopentane/Water Emulsion[J]. , 2010, 18(2): 202-206.
李士凤, 樊栓狮, 王金渠, 等. Clathrate Hydrate Capture of CO₂ from Simulated Flue Gas with Cyclopentane/Water Emulsion[J]. 中国化学工程学报（英文版）, 2010,18(2):202-206. DOI: 10.1016/S1004-9541(08)60343-2. DOI：

from Simulated Flue Gas with Cyclopentane/Water Emulsion[J]. , 2010, 18(2): 202-206. DOI： 10.1016/S1004-9541(08)60343-2.

摘要

Abstract

Capture of CO

by hydrate is one of the attractive technologies for reducing greenhouse effect.The primary challenges are the large energy consumption

low hydrate formation rate and separation efficiency.This work presents a new method for capture of CO

from simulated flue gasCO

(16.60%

by mole)/N

binary mixture by formation of cyclopentane(CP) hydrates at initial temperature of 8.1℃ with the feed pressures from 2.49 to 3.95 MPa.The effect of cyclopentane and cyclopentane/water emulsion on the hydrate formation rate and CO

separation efficiency was studied in a 1000 ml stirred reactor.The results showed the hydrate formation rate could be increased remarkably with cyclopentane/water emulsion.CO

could be enriched to 43.97%(by mole) and 35.29%(by mole) from simulated flue gas with cyclopentane and cyclopentane/water(O/W) emulsion

respectively

by one stage hydrate separation under low feed pressure.CO

separation factor with cyclopentane was 6.18

higher than that with cyclopentane/water emulsion(4.01)

in the range of the feed pressure.The results demonstrated that cyclopentane/water emulsion is a good additive for efficient hydrate capture of CO

关键词

Keywords

references

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

New process development and process evaluation for capturing CO2 in flue gas from power plants using ionic liquid [emim][Tf2N]

Recent advances on the membrane processes for CO2 separation

Kinetic and Phase Behaviors of Catalytic Cracking Dry Gas Hydrate in Water-in-Oil Emulsion

Research on the prediction model of effective thermal conductivity of marine natural gas hydrate reservoirs based on machine learning

C3H8 synergistic flue gas (CO2+N2) replacement of CH4 hydrate

Clathrate Hydrate Capture of CO2 from Simulated Flue Gas with Cyclopentane/Water Emulsion

Clathrate Hydrate Capture of CO2 from Simulated Flue Gas with Cyclopentane/Water Emulsion

DOI：10.1016/S1004-9541(08)60343-2

摘要

Abstract

关键词

Keywords

references

Clathrate Hydrate Capture of CO₂ from Simulated Flue Gas with Cyclopentane/Water Emulsion

Clathrate Hydrate Capture of CO₂ from Simulated Flue Gas with Cyclopentane/Water Emulsion