catalyst with tetrabutyloxsilicane as electron donor was prepared for ethylene slurry polymerization process. The properties of the catalyst such as particle size distribution
catalytic activity
hydrogen responsibility and copolymerization performance were investigated and compared with commercial catalyst (imported catalyst). Copolymerization of ethylene and 1-butylene using the catalyst was studied in a pilot plant. The composition
structure and property of the copolymer were characterized by
13
C nuclear magnetic resonance (
13
C NMR) and gel permeation chromatography-Infrared (GPC-IR)
and compared with those of the copolymer obtained from a commercial catalyst. In comparison with the commercial catalyst
the novel catalyst had a higher activity (up to 34.6 kg·g
-1
) and a better particle size distribution (PSD)
and produced polymers having higher bulk density (up to 0.37 g·cm
-3
) with less fine resin. Meanwhile
the novel catalyst showed a higher hydrogen responsibility and better copolymerization performance. The results indicated that the copolymer obtained from the novel catalyst has a higher branch in the high molecular weight fraction and lower branch in the low molecular weight fraction.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.
Ethylene Polymerization Using Improved Polyethylene Catalyst
Dynamics and Predictive Control of Gas Phase Propylene Polymerization in Fluidized Bed Reactors
Enhanced mass transfer in flexible electrodes of open-pore cobalt disulfide nanosheets supported on sulfur-doped carbon fibers for efficient zinc-air batteries
Bubble dispersion intensification via flow guidance and drainage in a bubble column with internals
Understanding temperature-dependent degradation in proton exchange membrane water electrolyzer: The critical role of porous transport layer
相关作者
朱孝恒
郭子芳
岑为
毛炳权
Ahmad Shamiri
Mohamed azlan Hussain
Farouq sabri Mjalli
Navid Mostoufi
相关机构
Department of Chemistry, Beijing University of Chemical Technology
Beijing Research Institute of Chemical Industry, China Petroleum&Chemical Corporation
2 Training Center, Razi Petrochemical Company, Bandar Imam
3 UM Power Energy Dedicated Advanced Centre (UMPEDAC), University of Malaya
4 Petroleum and Chemical Engineering Department, Sultan Qaboos University, Muscat