Experimental Study of Fouling on Heat Transfer Surface During Forced Convective Heat Transfer

全贞花; 陈永昌; 马重芳

doi:10.1016/S1004-9541(08)60117-2

Your Location：

Home >

Browse articles >

Experimental Study of Fouling on Heat Transfer Surface During Forced Convective Heat Transfer

Updated：2026-01-06

- Experimental Study of Fouling on Heat Transfer Surface During Forced Convective Heat Transfer
- Experimental Study of Fouling on Heat Transfer Surface During Forced Convective Heat Transfer
- 中国化学工程学报（英文版） 2008年16卷第4期页码：535-540
- Affiliations：
  
  The Education Ministry Key Laboratory of Enhanced Heat Transfer and Energy Conservation, College of Environmental and Energy Engineering, Beijing University of Technology,Beijing,China,100124
- Author bio：
- Funds：
  
  the State Key Development Program for Basic Research of China(G2007CB206904);the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education of China(00084);the Doctoral Fund of Beijing University of Technology(X004016200801)
- DOI：10.1016/S1004-9541(08)60117-2
  中图分类号：
- 纸质出版：2008
- Accepted：
Scan QR Code
全贞花, 陈永昌, 马重芳. Experimental Study of Fouling on Heat Transfer Surface During Forced Convective Heat Transfer[J]. 中国化学工程学报（英文版）, 2008,16(4):535-540.

QUAN Zhenhua, CHEN Yongchang, MA Chongfang. Experimental Study of Fouling on Heat Transfer Surface During Forced Convective Heat Transfer[J]. , 2008, 16(4): 535-540.
全贞花, 陈永昌, 马重芳. Experimental Study of Fouling on Heat Transfer Surface During Forced Convective Heat Transfer[J]. 中国化学工程学报（英文版）, 2008,16(4):535-540. DOI： 10.1016/S1004-9541(08)60117-2.

QUAN Zhenhua, CHEN Yongchang, MA Chongfang. Experimental Study of Fouling on Heat Transfer Surface During Forced Convective Heat Transfer[J]. , 2008, 16(4): 535-540. DOI： 10.1016/S1004-9541(08)60117-2.

摘要

Abstract

An experimental study was conducted to investigate the fouling process of calcium carbonate on the heat transfer surface

during forced convective heat transfer. The dynamic monitoring apparatus of fouling resistance was set up for the present experiments. The fouling behaviors were examined under different factors including fluid velocity

hardness

alkalinity

solution temperature

and wall temperature. Asymptotic fouling curves varying with time were obtained. The fouling rate and asymptotic fouling resistance increased and the induction periods were shortened with the fluid velocity decreasing

hardness and alkalinity increasing

and solution temperature and heat transfer surface temperature increasing. The components of fouling that formed on the heat transfer surface included crystallization fouling and particulate fouling. The thermal performance parameter of fouling

varied from 380 to 2600 kg·W·(m

·K)

-1

increasing with growing velocity and decreasing solution temperature

hardness or alkalinity. Furthermore

the thermal conductivity of fouling

varied from 1.7 to 2.2 W·(m·K)

-1

关键词

Keywords

references

浏览量

4315

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Direct image-based fractal characterization of micromorphology of calcium carbonate fouling crystals

Research on composite scale inhibitors for inhibiting calcium carbonate scaling in high temperature geothermal fluid

Inhibition research of double protection on flame propagations of hydrogen doped methane explosions

Research on the prediction model of effective thermal conductivity of marine natural gas hydrate reservoirs based on machine learning

Utilization of fly ash for CO2 capture through mineral carbonation: An experimental study with Indonesian coal fly ash