Tuning the Morphology of Pharmaceutical Compounds <i>via</i> Model Based Solvent Selection

Arunprakash T. Karunanithi; Charles Acquah; Luke E. K. Achenie

doi:10.1016/S1004-9541(08)60107-X

Your Location：

Home >

Browse articles >

Tuning the Morphology of Pharmaceutical Compounds via Model Based Solvent Selection

Updated：2026-01-06

- Tuning the Morphology of Pharmaceutical Compounds via Model Based Solvent Selection
- Tuning the Morphology of Pharmaceutical Compounds via Model Based Solvent Selection
- 中国化学工程学报（英文版） 2008年16卷第3期页码：465-473
- Affiliations：
  
  1. National Risk Management Research Laboratory, U. S. Environmental Protection Agency,Ohio,Cincinnati,USA
  2. Department of Chemical, Materials & Biomolecular Engineering, University of Connecticut, Storrs,Connecticut,USA
  3. Department of Chemical Engineering, Virginia Polytechnic Institute and State University, Blacksburg,Virginia,USA
- Author bio：
- Funds：
- DOI：10.1016/S1004-9541(08)60107-X
  中图分类号：
- 纸质出版：2008
- Accepted：
Scan QR Code
Arunprakash T. Karunanithi, Charles Acquah, Luke E. K. Achenie. Tuning the Morphology of Pharmaceutical Compounds via Model Based Solvent Selection[J]. 中国化学工程学报（英文版）, 2008,16(3):465-473. DOI: 10.1016/S1004-9541(08)60107-X.

Model Based Solvent Selection[J]. , 2008, 16(3): 465-473.
Arunprakash T. Karunanithi, Charles Acquah, Luke E. K. Achenie. Tuning the Morphology of Pharmaceutical Compounds via Model Based Solvent Selection[J]. 中国化学工程学报（英文版）, 2008,16(3):465-473. DOI: 10.1016/S1004-9541(08)60107-X. DOI：

Model Based Solvent Selection[J]. , 2008, 16(3): 465-473. DOI： 10.1016/S1004-9541(08)60107-X.

摘要

Abstract

In this paper we present a strategy for tuning the crystal morphology of pharmaceutical compounds by the appropriate choice of solvent

via

an optimization model.A three-stage approach involving a pre-design stage

a product design stage and a post-design experimental verification stage is presented.The pre-design stage addresses the formulation of the property constraint for crystal morphology.This involves crystallization experiments and development of property models and constraints for morphology.In the design stage various property requirements for the solvent along with crystal morphology are considered and the product design problem is formulated as a mixed integer nonlinear programming model.The design stage provides an optimal solvent/list of candidate solvents. Similar to the pre-design stage

in the post design experimental verification stage

the morphology of the crystals (precipitated from the designed solvent)is verified through crystallization experiments followed by product characterization

via

scanning electron microscopy

powder X-ray diffraction imaging and Fourier transform spectra analysis.

关键词

Keywords

references

浏览量

1531

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Crystal Growth,Structure and Morphology of Rifapentine Methanol Solvate

The melting transformation mechanism of corundum and mullite in coal ash under reducing atmosphere

Evaporation crystallization for the extraction of potassium bromide from bitters by phase equilibrium

Study on purification process of electronic-rade cerium ammonium nitrate through crystallization

Enrichment and purification of nervonic acid from Acer truncatum seed oil by combining vacuum distillation and low-temperature crystallization: Experiments and process modeling

Tuning the Morphology of Pharmaceutical Compounds via Model Based Solvent Selection

Tuning the Morphology of Pharmaceutical Compounds via Model Based Solvent Selection

DOI：10.1016/S1004-9541(08)60107-X

摘要

Abstract

关键词

Keywords

references